Influence of Discretely Introduced Cutouts on the Buckling of Shallow Shells with Double Curvature

[1] Treshchev, A., Kuznetsova, V., Study of the Influence of the Kinetics of Hydrogen Saturation on the Stress-Deformed State of a Spherical Shell Made from Titanium Alloy, International Journal for Computational Civil and Structural Engineering, 18(2), 2022, 121–130. DOI: 10.22337/2587-9618-2022-18-2-121-130.

[2] Razov, I., Sokolov, V., Dmitriev, A., Ogorodnova, J., Parametric vibrations of the underground oil pipeline, E3S Web of Conference; ed. Malygina I., 363, 2022, 01038. DOI: 10.1051/e3sconf/202236301038.

[3] Kayumov, R.A., Shakirzyanov, F.R., Large Deflections and Stability of Low-Angle Arches and Panels During Creep Flow, Multiscale Solid Mechanics; ed. Altenbach H., Eremeyev V.A., Igumnov L.A., Cham: Springer International Publishing, 141, 2021, 237–248. DOI: 10.1007/978-3-030-54928-2_18.

[4] Kamenev, I.V., Semenov, A.A., Rationale of the use of the constructive anisotropy method in the calculation of shallow shells of double curvature, weakened holes, PNRPU Mechanics Bulletin, 2, 2016, 54–68. DOI: 10.15593/perm.mech/2016.2.05. (in Russian)

[5] Karpov, V.V., Models of the shells having ribs, reinforcement plates and cutouts, International Journal of Solids and Structures, 146, 2018, 117–135. DOI: 10.1016/j.ijsolstr.2018.03.024.

[6] Solovei, N.A., Krivenko, O.P., Malygina, O.A., Finite element models for the analysis of nonlinear deformation of shells stepwise-variable thickness with holes, channels and cavities, Magazine of Civil Engineering, 1(53), 2015, 56–69. DOI: 10.5862/MCE.53.6. (in Russian)

[7] Zakharova, Yu.V., Lokhmatova, L.G., Simulation of stress-strain state of defected composite shells, Engineering Journal: Science and Innovation, 11(59), 2016. DOI: 10.18698/2308-6033-2016-11-1552. (in Russian)

[8] Zhao, C., Niu, J., Zhang, Q., Zhao, C., Xie, J., Buckling behavior of a thin-walled cylinder shell with the cutout imperfections, Mechanics of Advanced Materials and Structures, 26(18), 2019, 1536–1542. DOI: 10.1080/15376494.2018.1444225.

[9] Dmitriev, V.G., Egorova, O.V., Zhavoronok, S.I., Rabinskii, L.N., Investigation of Buckling Behavior for Thin-Walled Bearing Aircraft Structural Elements with Cutouts by Means of Numerical Simulation, Russian Aeronautics, 61(2), 2018, 165–174. DOI: 10.3103/S1068799818020034.

[10] Yılmaz, H., Kocabaş, İ., Özyurt, E., Empirical equations to estimate non-linear collapse of medium-length cylindrical shells with circular cutouts, Thin-Walled Structures, 119, 2017, 868–878. DOI: 10.1016/j.tws.2017.08.008.

[11] Xia, Y., Wang, H., Zheng, G., Shen, G., Hu, P., Discontinuous Galerkin isogeometric analysis with peridynamic model for crack simulation of shell structure, Computer Methods in Applied Mechanics and Engineering, 398, 2022, 115193. DOI: 10.1016/j.cma.2022.115193.

[12] Ambati, M., Heinzmann, J., Seiler, M., Kästner, M., Phase‐field modeling of brittle fracture along the thickness direction of plates and shells, International Journal for Numerical Methods in Engineering, 123(17), 2022, 4094–4118. DOI: 10.1002/nme.7001.

[13] Wang, Y., Hu, J., Kennedy, D., Wang, J., Wu, J., Adaptive mesh refinement for finite element analysis of the free vibration disturbance of cylindrical shells due to circumferential micro-crack damage, Engineering Computations, 39(9), 2022, 3271–3295. DOI: 10.1108/EC-09-2021-0555.

[14] Giani, S., Hakula, H., Free vibration of perforated cylindrical shells of revolution: Asymptotics and effective material parameters, Computer Methods in Applied Mechanics and Engineering, 403, 2023, 115700. DOI: 10.1016/j.cma.2022.115700.

[15] Arbelo, M.A., Herrmann, A., Castro, S.G.P., Khakimova, R., Zimmermann, R., Degenhardt, R., Investigation of Buckling Behavior of Composite Shell Structures with Cutouts, Applied Composite Materials, 22(6), 2015, 623–636. DOI: 10.1007/s10443-014-9428-x.

[16] Gangadhar, L., Kumar, T.S., Finite Element Buckling Analysis of Composite Cylindrical Shell with Cutouts Subjected to Axial Compression, International Journal of Advanced Science and Technology, 89, 2016, 45–52. DOI: 10.14257/ijast.2016.89.06.

[17] Shen, K.-C., Yang, Z.-Q., Jiang, L.-L., Pan, G., Buckling and Post-Buckling Behavior of Perfect/Perforated Composite Cylindrical Shells under Hydrostatic Pressure, Journal of Marine Science and Engineering, 10(2), 2022, 278. DOI: 10.3390/jmse10020278.

[18] Ghanbari Ghazijahani, T., Jiao, H., Holloway, D., Structural behavior of shells with different cutouts under compression: An experimental study, Journal of Constructional Steel Research, 105, 2015, 129–137. DOI: 10.1016/j.jcsr.2014.10.020.

[19] Krishna, G.V., Narayanamurthy, V., Viswanath, C., Buckling behaviour of FRP strengthened cylindrical metallic shells with cut-outs, Composite Structures, 300, 2022, 116176. DOI: 10.1016/j.compstruct.2022.116176.

[20] Sohan, R., Likith, S., Sai, J., Vadlamani, S., Linear, nonlinear and post buckling analysis of a stiffened panel with cutouts, IOP Conference Series: Materials Science and Engineering, 1248(1), 2022, 012078. DOI: 10.1088/1757-899X/1248/1/012078.

[21] da Silveira, T., Pinto, V., Neufeld, J.P., Pavlovic, A., Rocha, L., dos Santos, E., Isoldi, L.A., Applicability Evidence of Constructal Design in Structural ‎Engineering: Case Study of Biaxial Elasto-Plastic Buckling of ‎Square Steel Plates with Elliptical Cutout, Journal of Applied and Computational Mechanics, 7(2), 2021, 922–934. DOI: 10.22055/jacm.2021.35385.2647.

[22] Keshav, V., Patel, S.N., Kumar, R., Watts, G., Effect of Cutout on the Stability and Failure of Laminated Composite Cylindrical Panels Subjected to In-Plane Pulse Loads, International Journal of Structural Stability and Dynamics, 22(08), 2022, 2250087. DOI: 10.1142/S0219455422500870.

[23] Dewangan, H.C., Panda, S.K., Hirwani, C.K., Numerical deflection and stress prediction of cutout borne damaged composite flat/curved panel structure, Structures, 31, 2021, 660–670. DOI: 10.1016/j.istruc.2021.02.016.

[24] Dewangan, H.C., Sharma, N., Panda, S.K., Thermomechanical loading and cut-out effect on static and dynamic responses of multilayered structure with TD properties, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(16), 2022, 9081–9094. DOI: 10.1177/09544062221089153.

[25] Li, Q., Wang, D.F., Influence of cutout position on buckling of large-scale thin-walled cylindrical shell of desulphurizing tower with welding induced imperfection under wind loading, Applied Mechanics and Materials, 687–691, 2014, 68–72. DOI: 10.4028/www.scientific.net/AMM.687-691.68.

[26] Labans, E., Bisagni, C., Celebi, M., Tatting, B., Gürdal, Z., Blom-Schieber, A., Rassaian, M., Wanthal, S., Bending of Composite Cylindrical Shells with Circular Cutouts: Experimental Validation, Journal of Aircraft, 56(4), 2019, 1534–1550. DOI: 10.2514/1.C035247.

[27] Gokyer, Y., Sonmez, F.O., Topology optimization of cylindrical shells with cutouts for maximum buckling strength, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(1), 2023, 13. DOI: 10.1007/s40430-022-03941-w.

[28] Groh, R.M.J., Wu, K.C., Nonlinear Buckling and Postbuckling Analysis of Tow-Steered Composite Cylinders with Cutouts, AIAA Journal, 60(9), 2022, 5533–5546. DOI: 10.2514/1.J061755.

[29]      Shahani, A.R., Kiarasi, F., Numerical and Experimental Investigation on Post-buckling ‎Behavior of Stiffened Cylindrical Shells with Cutout subject to ‎Uniform Axial Compression, Journal of Applied and Computational Mechanics, 9(1), 2023, 25–44. DOI: 10.22055/jacm.2021.33649.2261.

[30] Li, Z., Cao, Y., Pan, G., Influence of geometric imperfections on the axially loaded composite conical shells with and without cutout, AIP Advances, 10(9), 2020, 095106. DOI: 10.1063/5.0021103.

[31] Kamaloo, A., Jabbari, M., Tooski, M.Y., Javadi, M., Nonlinear Free Vibrations Analysis of Delaminated Composite Conical Shells, International Journal of Structural Stability and Dynamics, 20(01), 2020, 2050010. DOI: 10.1142/S0219455420500108.

[32] Kumar Chaubey, A., Kumar, A., Chakrabarti, A., Effect of multiple cutouts on shear buckling of laminated composite spherical shells, Materials Today: Proceedings, 21, 2020, 1155–1163. DOI: 10.1016/j.matpr.2020.01.065.

[33] Juhász, Z., Szekrényes, A., An analytical solution for buckling and vibration of delaminated composite spherical shells, Thin-Walled Structures, 148, 2020, 106563. DOI: 10.1016/j.tws.2019.106563.

[34] Semenov, A.A., Moskalenko, L.P., Karpov, V.V., Sukhoterin, M.V., Buckling of cylindrical panels strengthened with an orthogonal grid of stiffeners, Bulletin of Civil Engineers, 6(83), 2020, 117–125. DOI: 10.23968/1999-5571-2020-17-6-117-125. (in Russian)

[35] Karpov, V.V., Semenov, A.A., Refined model of stiffened shells, International Journal of Solids and Structures, 199, 2020, 43–56. DOI: 10.1016/j.ijsolstr.2020.03.019.