آمار
| تعداد نشریات | 31 |
| تعداد شمارهها | 1,029 |
| تعداد مقالات | 9,100 |
| تعداد مشاهده مقاله | 10,289,988 |
| تعداد دریافت فایل اصل مقاله | 8,526,190 |
The Relations between the Various Critical Temperatures of Thin FGM Plates | ||
| Journal of Applied and Computational Mechanics | ||
| دوره 6، Special Issue، اسفند 2020، صفحه 1404-1419 اصل مقاله (1.31 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22055/jacm.2020.34697.2459 | ||
| نویسندگان | ||
| Ahmed Hassan Ahmed Hassan* ؛ Naci Kurgan؛ Nihat Can | ||
| Department of Mechanical Engineering, Ondokuz Mayis University, Samsun, 55139, Turkey | ||
| چکیده | ||
| This work investigates the relations between the critical temperature of the thin FGM plates under various temperature distributions through the thickness resting on the Pasternak elastic foundation. Both rectangular and skew plates are investigated. The uniform, linear, and nonlinear temperature distributions through the plate’s thickness are considered. Formulations are derived based on the classical plate theory (CPT) considering the von Karman geometrical nonlinearity taking the physical neutral plane as the reference plane. The partial differential formulation is separated into two sets of ordinary differential equations using the extended Kantorovich method (EKM). The stability equations and boundary conditions terms are derived according to Trefftz criteria using the variational calculus expressed in an oblique coordinate system. Novel multi-scale plots are presented to show the linear relations between the critical temperatures under various temperature distributions. The critical temperature of plates with different materials are also found linearly related. Resulting relations should be a huge time saver in the analysis process, as by knowing one critical temperature of the one FGM plate under one temperature distribution many other critical temperatures of many other FGM plates under any temperature distributions can be obtained instantly. | ||
| کلیدواژهها | ||
| Multi-term extended Kantorovich method؛ Classical plate theory؛ Thermal buckling؛ Functionally graded material؛ Pasternak elastic foundation | ||
| مراجع | ||
|
[1] Shen, M., and Bever, M., Gradients in polymeric materials, Journal of Materials science, 7(7), 1972, 741-746. [2] Bever, M., and Duwez, P., Gradients in composite materials, Materials Science and Engineering, 10, 1972, 1-8. [3] Hassan, A. H. A., and Kurgan, N., A Review on buckling analysis of functionally graded plates under thermo-mechanical loads, International Journal of Engineering & Applied Sciences, 11(1), 2019, 345-368. [4] Ichikawa, K., Functionally graded materials in the 21st century: a workshop on trends and forecasts, Springer Science & Business Media, 2001. [5] Singh, A. K., Noise Emission form Functionally Graded Materials based Polypropylene Spur Gears-A Tribological Investigation, Materials Today: Proceedings, 5(2), 2018, 8199-8205. [6] Singh, A. K., A novel technique for in‐situ manufacturing of functionally graded materials based polymer composite spur gears, Polymer Composites, 40(2), 2019, 523-535. [7] Tian, X., Zhao, J., Yang, H., Wang, Z., and Liu, H., High-speed intermittent turning of GH2132 alloy with Si 3 N 4/(W, Ti) C/Co graded ceramic tool, International Journal of Advanced Manufacturing Technology, 100(1-4), 2019, 401-408. [8] Ngueyep, L. L. M., Ndop, J., Nkene, E. R. A., and Ndjaka, J.-M. B., Numerical and Analytical Calculations for Modeling and Designing Drilling Wicks or Rotary Cutters Based of Functionally Graded Materials, Journal of Engineering, 2018, 2018. [9] Nikbakht, S., Kamarian, S., and Shakeri, M., A review on optimization of composite structures Part II: Functionally graded materials, Composite Structures, 214, 2019, 83-102. [10] El-Galy, I., Saleh, B., and Ahmed, M., Functionally graded materials classifications and development trends from industrial point of view, SN Applied Sciences, 1(11), 2019, 1-23. [11] Reddy, J. N., Theory and analysis of elastic plates and shells, CRC press, 2006. [12] Cuba, L., Arciniega, R., and MANTARI, J. L., Generalized 2-Unknown’s HSDT to Study Isotropic and Orthotropic Composite Plates, Journal of Applied and Computational Mechanics, 5(1), 2019, 141-149. [13] Zenkour, A. M., Hafed, Z. S., and Radwan, A. F., Bending Analysis of Functionally Graded Nanoscale Plates by Using Nonlocal Mixed Variational Formula, Mathematics, 8(7), 2020, 1162. [14] Sobhy, M., and Zenkour, A. M., A comprehensive study on the size-dependent hygrothermal analysis of exponentially graded microplates on elastic foundations, Mechanics of Advanced Materials and Structures, 27(10), 2020, 816-830. [15] Jena, S. K., Chakraverty, S., Malikan, M., and Sedighi, H. M., Implementation of Hermite–Ritz method and Navier’s technique for vibration of functionally graded porous nanobeam embedded in Winkler–Pasternak elastic foundation using bi-Helmholtz nonlocal elasticity, Journal of Mechanics of Materials and Structures, 15(3), 2020, 405-434. [16] Sgouros, A. P., Kalosakas, G., Papagelis, K., and Galiotis, C., Compressive response and buckling of graphene nanoribbons, Scientific Reports, 8(1), 2018, 9593. [17] Zarei, M., Faghani, G., Ghalami, M., and Rahimi, G. H., Buckling and Vibration Analysis of Tapered Circular Nano Plate, Journal of Applied and Computational Mechanics, 4(1), 2018, 40-54. [18] Ventsel, E., Krauthammer, T., and Carrera, E., Thin plates and shells: theory, analysis, and applications, Applied Mechanics Reviews, 55(4), 2002, B72-B73. [19] Srinivasa, C., Kumar, Y. S. W. P., and Banagar, A. R., Bending Behavior of Simply Supported Skew Plates, Int. J. Sci. Eng. Res., 9, 2018, 21-26. [20] Monroe-Aerospace, "Why Do Airplanes Have Swept Wings?," 2019, https://monroeaerospace.com/blog/why-do-airplanes-have-swept-wings/. [21] Shen, H.-S., and Wang, Z.-X., Nonlinear bending of FGM plates subjected to combined loading and resting on elastic foundations, Composite Structures, 92(10), 2010, 2517-2524. [22] Mahmoudi, A., Benyoucef, S., Tounsi, A., Benachour, A., Adda Bedia, E. A., and Mahmoud, S., A refined quasi-3D shear deformation theory for thermo-mechanical behavior of functionally graded sandwich plates on elastic foundations, Journal of Sandwich Structures & Materials, 21(6), 2019, 1906-1929. [23] Zhang, Y. F., and Liu, J. T., A widespread internal resonance phenomenon in functionally graded material plates with longitudinal speed, Scientific Reports, 9(1), 2019, 1907. [24] Menasria, A., Kaci, A., Bousahla Abdelmoumen, A., Bourada, F., Tounsi, A., Benrahou Kouider, H., Tounsi, A., Adda Bedia, E. A., and Mahmoud, S. R., A four-unknown refined plate theory for dynamic analysis of FG-sandwich plates under various boundary conditions, Steel and Composite Structures, 36(3), 2020, 355-367. [25] Hassan Ahmed Hassan, A., and Kurgan, N., Bending analysis of thin FGM skew plate resting on Winkler elastic foundation using multi-term extended Kantorovich method, Engineering Science and Technology, an International Journal, 23(4), 2020, 788-800. [26] Zine, A., Bousahla Abdelmoumen, A., Bourada, F., Benrahou Kouider, H., Tounsi, A., Adda Bedia, E. A., Mahmoud, S. R., and Tounsi, A., Bending analysis of functionally graded porous plates via a refined shear deformation theory, Computers and Concrete, 26(1), 2020, 63-74. [27] Hassan, A. H. A., and Kurgan, N., Buckling of thin skew isotropic plate resting on Pasternak elastic foundation using extended Kantorovich method, Heliyon, 6(6), 2020, e04236. [28] Rabhi, M., Benrahou, K. H., Kaci, A., Houari, M. S. A., Bourada, F., Bousahla, A. A., Tounsi, A., Bedia, E. A., Mahmoud, S., and Tounsi, A., A new innovative 3-unknowns HSDT for buckling and free vibration of exponentially graded sandwich plates resting on elastic foundations under various boundary conditions, Geomechanics and Engineering, 22(2), 2020, 119. [29] Javaheri, R., and Eslami, M., Thermal buckling of functionally graded plates, AIAA Journal, 40(1), 2002, 162-169. [30] Javaheri, R., and Eslami, M., Thermal buckling of functionally graded plates based on higher order theory, Journal of Thermal Stresses, 25(7), 2002, 603-625. [31] Saadatpour, M., Azhari, M., and Bradford, M., Buckling of arbitrary quadrilateral plates with intermediate supports using the Galerkin method, Computer Methods in Applied Mechanics and Engineering, 164(3-4), 1998, 297-306. [32] Nguyen-Xuan, H., Tran, L. V., Nguyen-Thoi, T., and Vu-Do, H., Analysis of functionally graded plates using an edge-based smoothed finite element method, Composite Structures, 93(11), 2011, 3019-3039. [33] Nihat, C., KURGAN, N., and HASSAN, A. H. A., Buckling Analysis of Functionally Graded Plates Using Finite Element Analysis, International Journal of Engineering and Applied Sciences, 12(1), 2020, 43-56. [34] Kerr, A. D., An extension of the Kantorovich method, Quarterly of Applied Mathematics, 26(2), 1968, 219-229. [35] Singhatanadgid, P., and Singhanart, T., The Kantorovich method applied to bending, buckling, vibration, and 3D stress analyses of plates: A literature review, Mechanics of Advanced Materials and Structures, 26(2), 2019, 170-188. [36] Shufrin, I., Rabinovitch, O., and Eisenberger, M., A semi-analytical approach for the geometrically nonlinear analysis of trapezoidal plates, International Journal of Mechanical Sciences, 52(12), 2010, 1588-1596. [37] Joodaky, A., Joodaky, I., Hedayati, M., Masoomi, R., and Farahani, E. B., Deflection and stress analysis of thin FGM skew plates on Winkler foundation with various boundary conditions using extended Kantorovich method, Composites Part B: Engineering, 51, 2013, 191-196. [38] Joodaky, A., and Joodaky, I., A semi-analytical study on static behavior of thin skew plates on Winkler and Pasternak foundations, International Journal of Mechanical Sciences, 100, 2015, 322-327. [39] Rajabi, J., and Mohammadimehr, M., Bending analysis of a micro sandwich skew plate using extended Kantorovich method based on Eshelby-Mori-Tanaka approach, Computers and Concrete, 23(5), 2019, 361-376. [40] Eisenberger, M., and Alexandrov, A., Buckling loads of variable thickness thin isotropic plates, Thin-Walled Structures, 41(9), 2003, 871-889. [41] Shufrin, I., and Eisenberger, M., Stability of variable thickness shear deformable plates—first order and high order analyses, Thin-Walled Structures, 43(2), 2005, 189-207. [42] Shufrin, I., Rabinovitch, O., and Eisenberger, M., Buckling of laminated plates with general boundary conditions under combined compression, tension, and shear—A semi-analytical solution, Thin-Walled Structures, 46(7-9), 2008, 925-938. [43] Eisenberger, M., and Shufrin, I. Buckling of plates by the multi term extended Kantorovich method, 7th EUROMECH Solid Mechanics Conference, Lisbon, Portugal, 2009. [44] Jones, R. M., Buckling of bars, plates, and shells, Bull Ridge Corporation, 2006. [45] Eslami, M. R., Eslami, J., and Jacobs, Buckling and postbuckling of beams, plates, and shells, Springer, 2018. [46] Zhang, D.-G., and Zhou, Y.-H., A theoretical analysis of FGM thin plates based on physical neutral surface, Computational Materials Science, 44(2), 2008, 716-720. [47] Wang, X., and Yuan, Z., Buckling analysis of isotropic skew plates under general in-plane loads by the modified differential quadrature method, Applied Mathematical Modelling, 56, 2018, 83-95. [48] Khan, T., Zhang, N., and Akram, A. State of the art review of Functionally Graded Materials, 2019 2nd International Conference on Computing, Mathematics and Engineering Technologies (iCoMET), 2019, 30-31 Jan. 2019. [49] Ghannadpour, S., Ovesy, H., and Nassirnia, M., Buckling analysis of functionally graded plates under thermal loadings using the finite strip method, Computers & Structures, 108, 2012, 93-99. [50] Zhang, D.-G., Modeling and analysis of FGM rectangular plates based on physical neutral surface and high order shear deformation theory, International Journal of Mechanical Sciences, 68, 2013, 92-104. [51] Hassan, A. H. A., and Kurgan, N., Modeling and Buckling Analysis of Rectangular Plates in ANSYS, International Journal of Engineering & Applied Sciences, 11(1), 2019, 310-329. [52] Yu, T., Yin, S., Bui, T. Q., Liu, C., and Wattanasakulpong, N., Buckling isogeometric analysis of functionally graded plates under combined thermal and mechanical loads, Composite Structures, 162, 2017, 54-69. [53] Kiani, Y., Bagherizadeh, E., and Eslami, M., Thermal buckling of clamped thin rectangular FGM plates resting on Pasternak elastic foundation (Three approximate analytical solutions), ZAMM‐Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik, 91(7), 2011, 581-593. [54] Zhao, X., Lee, Y., and Liew, K. M., Mechanical and thermal buckling analysis of functionally graded plates, Composite Structures, 90(2), 2009, 161-171. | ||
|
آمار تعداد مشاهده مقاله: 721 تعداد دریافت فایل اصل مقاله: 614 |
||