آمار
| تعداد نشریات | 31 |
| تعداد شمارهها | 1,032 |
| تعداد مقالات | 9,135 |
| تعداد مشاهده مقاله | 10,461,820 |
| تعداد دریافت فایل اصل مقاله | 8,637,530 |
Multi-objective Optimization of Shot-peening Parameters using Design of Experiments and Finite Element Simulation: A Statistical Model | ||
| Journal of Applied and Computational Mechanics | ||
| مقاله 5، دوره 8، شماره 3، مهر 2022، صفحه 838-852 اصل مقاله (1.67 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22055/jacm.2020.33102.2152 | ||
| نویسندگان | ||
| Mahdi Hassanzadeh؛ Seyed Ebrahim Moussavi Torshizi* | ||
| Faculty of Mechanical and Energy Engineering, Shahid Beheshti University, A.C., Tehran, Iran | ||
| چکیده | ||
| Shot-peening is a mechanical surface treatment used extensively in the industry to enhance the performance of metal parts against fatigue. Thus, it is important to determine main parameters of shot-peening in order to obtain its optimal values. The purpose of this study is to achieve a statistical model to determine the important parameters of the shot-peening process by considering the effect of sample thickness on the responses and achieving the multi-objective optimal parameters. To do this, response surface methodology are used to determine the governing models between the response variable and the input parameters. Shot velocity, shot diameter, coverage percentage and sample thickness are selected as shot-peeningparameters. Residual compressive stress, its depth and roughness are considered as the response variable. Using finite element analysis, shot-peening process are simulated. The desirability function approach is used for multi-objective optimization so that the optimal shot-peeningparameters, which simultaneously provide two response variables in optimal mode, are obtained. The results show that surface stress and maximum residual stress are independent of shot velocity, whereas, the depth of the compressible stress and roughness are directly related to shot velocity. In addition, thickness modifies surface stress and the depth of the compressible stress. The optimal conditions for surface stress, maximum compressive stress, and roughness simultaneously with high-coverage and low-velocity can be achieved as well. | ||
| کلیدواژهها | ||
| Shot-peening؛ Finite element method؛ Design of experiments (DoE)؛ Residual stresses؛ roughness | ||
| مراجع | ||
|
[1] Society of Automotive Engineers Handbook: SAE Publications, 1986.
[2] R. Fathallah, H. Sidhom, C. Braham, and L. Castex, Effect of surface properties on high cycle fatigue behaviour of shot peened ductile steel, Materials Science and Technology, 19, 2003, 1050-1056.
[3] A. Eleiche, M. Megahed, and N. Abd-Allah, The shot-peening effect on the HCF behavior of high-strength martensitic steels, Journal of Materials Processing Technology, 113, 2001, 502-508.
[4] D. Hills, R. Waterhouse, and B. Noble, An analysis of shot-peening, The Journal of Strain Analysis for Engineering Design, 18, 1983, 95-100.
[5] Y. Al-Obaid, Shot-peening mechanics: experimental and theoretical analysis, Mechanics of Materials, 19, 1995, 251-260.
[6] S. Al-Hassani, Mechanical aspects of residual stress development in shot-peening, Shot-peening, 583, 1981.
[7] M. Obata and A. Sudo, Effect of shot-peening on residual stress and stress corrosion cracking for cold worked austenitic stainless steel, in Proceedings of the ICSP-5 Conference, Oxford, UK, 1993.
[8] T. Dorr, M. Hilpert, P. Beckmerhagen, A. Kiefer, and L. Wagner, Influence of shot-peening on fatigue performance of high-strength aluminum-and magnesium alloys, 7th ICSP, American Shot-peening Society, 1999.
[9] A. A. Ahmed, M. Mhaede, M. Basha, M. Wollmann, and L. Wagner, The effect of shot-peening parameters and hydroxyapatite coverage on surface properties and corrosion behavior of medical grade AISI 316L stainless steel, Surface and Coverages Technology, 280, 2015, 347-358.
[10] S. Mahagaonkar, P. Brahmankar, and C. Seemikeri, Effect of shot-peening parameters on microhardness of AISI 1045 and 316L material: an analysis using design of experiment, The International Journal of Advanced Manufacturing Technology, 38, 2008, 563-574.
[11] Y.-S. Nam, Y.-I. Jeong, B.-C. Shin, and J.-H. Byun, Enhancing surface layer properties of an aircraft aluminum alloy by shot-peening using response surface methodology, Materials & Design, 83, 2015, 566-576.
[12] T. Hong, J. Ooi, and B. Shaw, A numerical simulation to relate the shot-peening parameters to the induced residual stresses, Engineering Failure Analysis, 15, 2008, 1097-1110.
[13] S. Meguid, G. Shagal, J. Stranart, and J. Daly, Three-dimensional dynamic finite element analysis of shot-peening induced residual stresses, Finite Elements in Analysis and Design, 31, 1999, 179-191.
[14] M. Guagliano, Relating Almen intensity to residual stresses induced by shot-peening: a numerical approach, Journal of Materials Processing Technology, 110, 2001, 277-286.
[15] T. Kim, J. H. Lee, H. Lee, and S.-k. Cheong, An area-average approach to peening residual stress under multi-impacts using a three-dimensional symmetry-cell finite element model with plastic shots, Materials & Design, 31, 2010, 50-59.
[16] W. Cheng, H. Jiacheng, G. Zhenbiao, X. Yangjian, and W. Xiaogui, Simulation on Residual stress of shot-peening Based on a Symmetrical cell model, Chinese Journal of Mechanical Engineering, 30, 2017, 344-351.
[17] S. Meguid, G. Shagal, and J. Stranart, Development and validation of novel FE models for 3D analysis of peening of strain-rate sensitive materials, Journal of Engineering Materials and Technology, 129, 2007, 271-283.
[18] A. Ghasemi, S. M. Hassani-Gangaraj, A. Mahmoudi, G. Farrahi, and M. Guagliano, Shot-peening coverage effect on residual stress profile by FE random impact analysis, Surface Engineering, 32, 2016, 861-870.
[19] H. Miao, S. Larose, C. Perron, and M. Lévesque, On the potential applications of a 3D random finite element model for the simulation of shot-peening, Advances in Engineering Software, 40, 2009, 1023-1038.
[20] A. Mahmoudi, A. Ghasemi, G. Farrahi, and K. Sherafatnia, A comprehensive experimental and numerical study on redistribution of residual stresses by shot-peening, Materials & Design, 90, 2016, 478-487.
[21] Y.-S. Nam, U. Jeon, H.-K. Yoon, B.-C. Shin, and J.-H. Byun, Use of response surface methodology for shot-peening process optimization of an aircraft structural part, The International Journal of Advanced Manufacturing Technology, 87, 2016, 2967-2981.
[22] A. AlSumait, Y. Li, M. Weaser, K. Niji, G. Battel, R. Toal, et al., A Comparison of the Fatigue Life of Shot-Peened 4340M Steel with 100, 200, and 300% Coverage, Journal of Materials Engineering and Performance, 28, 2019, 1780-1789.
[23] F. Petit-Renaud, J. Evans, A. Metcalfe, and B. Shaw, Optimization of a shot-peening process, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 222, 2008, 277-289.
[24] J. S. Romero, E. Rios, Y. Fam, and A. Levers, Optimisation of the shot-peening process in terms of fatigue resistance, University of Sheffield, 2002.
[25] P. George, N. Pillai, and N. Shah, Optimization of shot-peening parameters using Taguchi technique, Journal of Materials Processing Technology, 153, 2004, 925-930.
[26] A. Vielma, V. Llaneza, and F. Belzunce, Shot-peening intensity optimization to increase the fatigue life of a quenched and tempered structural steel, Procedia Engineering, 74, 2014, 273-278.
[27] O. Unal, Optimization of shot-peening parameters by response surface methodology, Surface and Coverages Technology, 305, 2016, 99-109.
[28] B. Bhuvaraghan, S. M. Srinivasan, B. Maffeo, and O. Prakash, Constrained probabilistic multi-objective optimization of shot-peening process, Engineering Optimization, 43, 2011, 657-673.
[29] S. Baragetti, Shot-peening optimisation by means of DOE: Numerical simulation and choice of treatment parameters, International Journal of Materials and Product Technology, 12, 1997, 83-109.
[30] O. Unal and E. Maleki, Shot-peening optimization with complex decision-making tool: Multi criteria decision-making, Measurement, 125, 2018, 133-141.
[31] R. Seddik, A. Bahloul, A. Atig, and R. Fathallah, A simple methodology to optimize shot-peening process parameters using finite element simulations, The International Journal of Advanced Manufacturing Technology, 90, 2017, 2345-2361.
[32] T. Kim, H. Lee, S. Jung, and J. H. Lee, A 3D FE model with plastic shot for evaluation of equi-biaxial peening residual stress due to multi-impacts, Surface and Coverages Technology, 206, 2012, 3125-3136.
[33] S.M.H. Gangaraj, M. Guagliano, and G. H. Farrahi, An approach to relate shot peening finite element simulation to the actual coverage, Surface and Coatings Technology, 243, 2014, 39-45.
[34] T. Kim, H. Lee, H.C. Hyun, and S. Jung, Effects of Rayleigh Damping, Friction and Rate-Dependency on 3D Residual Stress Simulation of Angled Shot Peening, Materials & Design, 46, 2013, 26–37.
[35] F. Yang, and G. Yukui, Predicting the peen forming effectiveness of Ti-6Al-4V strips with different thicknesses using realistic finite element simulations, Journal of Engineering Materials and Technology, 138, 2016, 011004.
[36] D. Kirk, Theoretical principles of shot-peening coverage, Shot Peener, 19, 2005, 24.
[37] D. C. Montgomery, Statistical quality control, vol. 7, Wiley, New York, 2009.
[38] Shotpeener Company, Shot size and speed to achieve Almen intensity, /http://www.shotpeener.com/learning/ref.phpS.
[39] A. Gariépy, H.Y. Miao, and M. Lévesque, Simulation of the shot peening process with variable shot diameters and impacting velocities, Advances in Engineering Software, 114, 2017, 121-133.
[40] L. Wagner, Mechanical surface treatments on titanium, aluminum and magnesium alloys, Materials Science and Engineering: A, 263, 1999, 210-216.
[41] ENISO, Geometrical Product Specifications (GPS)–Surface Texture: Profile Method–Terms, Definitions and Surface Texture Parameters, 1997.
[42] G. Derringer and R. Suich, Simultaneous optimization of several response variables, Journal of Quality Technology, 12, 1980, 214-219.
[43] D. S. Moore, G. P. McCabe, B. A. Craig, Introduction to the Practice of Statistics, 6th ed., W.H. Freeman and Company, 2009.
[44] V. Llaneza and F. Belzunce, Study of the effects produced by shot-peening on the surface of quenched and tempered steels: roughness, residual stresses and work hardening, Applied Surface Science, 356, 2015, 475-485.
[45] X. Wang, W. Zhou, G. Wu, J. Gan, Y. Yang, H. Huang, J. He, and H. Zhong, Combining the finite element method and response surface methodology for optimization of shot peening parameters, International Journal of Fatigue, 129, 2019, 105231.
[46] K. A. Soady, B.G. Mellor, G. D. West, G. Harrison, A. Morris, and P. A. S. Reed, Evaluating surface deformation and near surface strain hardening resulting from shot peening a tempered martensitic steel and application to low cycle fatigue, International Journal of Fatigue, 54, 2013, 106-117.
[47] S. Srilakshmi, D. V. Vidyasagar, and S. Devaki Rani, The Role of Residual Stresses with Various Shot Peening Parameters on 12%Cr Blading Steel for LP Turbine Applications, International Journal of Mechanical Engineering and Robotics Research, 1(1), 2013, 90-96. | ||
|
آمار تعداد مشاهده مقاله: 1,068 تعداد دریافت فایل اصل مقاله: 1,020 |
||