آمار
| تعداد نشریات | 31 |
| تعداد شمارهها | 1,029 |
| تعداد مقالات | 9,100 |
| تعداد مشاهده مقاله | 10,289,982 |
| تعداد دریافت فایل اصل مقاله | 8,526,183 |
Numerical Study on Subsurface Stress in Hertzian Contacts under Pure Sliding Conditions | ||
| Journal of Applied and Computational Mechanics | ||
| مقاله 4، دوره 6، Special Issue، اسفند 2020، صفحه 1098-1106 اصل مقاله (1.39 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22055/jacm.2019.31511.1882 | ||
| نویسنده | ||
| Fadi Ali* | ||
| Faculty of Technical Engineering, Tartous University, Tartous, Syria | ||
| چکیده | ||
| In this study, the two-dimensional numerical simulation on the subsurface stress field in Hertzian contact under the pure sliding condition for different speeds and coefficients of friction is presented. The Hertzian contacts are represented by a dry contact between a rigid flat surface and an elastic cylinder with radius R=12.5 mm. Simulation is carried out through two steps, the first one is for applying normal load and the second one is for applying angular speed for the cylinder. The results of subsurface stress filed for pure sliding are compared to non-moving Hertzian contact. The results show that pure sliding speed has a major effect on the value of maximum von Mises stress in the subsurface of contact. The effect of sliding speed is attributed to tangential forces and elastic deformation in the contact. On the other hand, the coefficient of friction has a primary effect on the position of maximum stress and the shift of the contact region. Indeed, when pure sliding motion is introduced with a low value of friction coefficient, the shift of the contact region is negligible compared to non-moving Hertzian contact. The study is extended to investigate the effect of contact geometry on subsurface stress for Hertzian contact in the cam-follower interface. The shape of the follower has a significant effect on the value and distribution of Hertzian stress, thus, the fatigue life of rubbing surfaces of the cam-follower interface. | ||
| کلیدواژهها | ||
| Sliding speed؛ Friction؛ Finite element analysis؛ Von Mises stress؛ Cam-follower | ||
| مراجع | ||
|
[1] Hertz, H., On the contact of elastic solids, Z. Reine Angew. Mathematik, 92, 1881, 156-171.
[2] Sackfield, A., Hills, D.A., Some Useful Results in the Classical Hertz Contact Problem, The Journal of Strain Analysis for Engineering Design, 18, 1983, 101–105.
[3] Johnson, K. L., Contact Mechanics, Cambridge University, Cambridge, 1987.
[4] Sadeghi, F., Jalalahmadi, B., Slack, T.S., Raje, N., Arakere, N. K., A review of rolling contact fatigue, Journal of Tribology, 131(4), 2009, 041403.
[5] Hamilton, G. M., Goodman, L. E., The stress field created by a circular sliding contact, Journal of Applied Mechanics, 33(2), 1966, 371-376.
[6] Bryant, M.D., Keer, L.M., Rough contact between elastically and geometrically identical curved bodies, Journal of Applied Mechanics, 49(2), 1982, 345-352.
[7] Chen, W. T., Stresses in some anisotropic materials due to indentation and sliding, International Journal of Solids and Structures, 5(3), 1969, 191-214.
[8] Zhou, R.S., Cheng, H.S., Mura, T., Micropitting in rolling and sliding contact under mixed lubrication, Journal of Tribology, 111(4), 1989, 605-613.
[9] Chen, W. W., Wang, Q. J., Thermomechanical analysis of elastoplastic bodies in a sliding spherical contact and the effects of sliding speed, heat partition, and thermal softening, Journal of Tribology, 130(4), 2008, 041402.
[10] Chen, W. W., Wang, Q.J., Kim, W., Transient thermomechanical analysis of sliding electrical contacts of elastoplastic bodies, thermal softening, and melting inception, Journal of Tribology, 131(2), 2009, 021406.
[11] Lee, S.C., Ren, N., The subsurface stress field created by three-dimensionally rough bodies in contact with traction, Tribology Transactions, 37(3), 1994, 615-621.
[12] Bailey, D. M., Sayles, R. S., Effect of roughness and sliding friction on contact stresses, Journal of Tribology, 113(4), 1991, 729-738.
[13] Zhang, H., Wang, W., Zhang, S., & Zhao, Z., Modeling of elastic finite-length space rolling-sliding contact problem, Tribology International, 113, 2017, 224-237.
[14] Zhao, J., Sadeghi, F., Nixon, H.M., A finite element analysis of surface pocket effects in Hertzian line contact, Journal of Tribology, 122(1), 2000, 47-54.
[15] Ali, Fadi, et al., Experimental and numerical investigation on the behavior of transverse limited micro-grooves in EHL point contacts, Tribology International, 84, 2015, 81-89.
[16] Ali, F., Křupka, I., Hartl, M., Reducing the friction of lubricated nonconformal point contacts by transverse shallow micro-grooves, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 229(4), 2015, 420-428.
[17] Boucly, V., NĂŠlias, D., Green, I., Modeling of the rolling and sliding contact between two asperities, Journal of Tribology, 129(2), 2007, 235-245.
[18] Kogut, L., Etsion, I., A semi-analytical solution for the sliding inception of a spherical contact, Journal of Tribology, 125(3), 2003, 499-506.
[19] Faulkner, A., Arnell, R. D., The development of a finite element model to simulate the sliding interaction between two, three-dimensional, elastoplastic, hemispherical asperities, Wear, 242(1-2), 2000, 114-122.
[20] Nosonovsky, M., Adams, G.G., Steady-state frictional sliding of two elastic bodies with a wavy contact interface, Journal of Tribology, 122(3), 2000, 490-495.
[21] Tripp, H., Hertzian contact in two and three dimensions, NASA Technical Paper, 2473, 1985.
[22] Ball, A.D., Dowson, D., Taylor C.M., Cam and follower design, Tribology Series, Elsevier, 14, 1989, 111-130.
[23] Ball, A.D., A Tribological Study of the Design and Performance of Automotive Cam, Ph.D. Thesis, Department of Mechanical Engineering, University of Leeds, Leeds, UK, 1988.
[24] Muller, R., The effect of lubrication on cam and tappet performance, MTZ, 27, 1966, 58.
[25] Dyson, A., Kinematics and Wear Patterns of Cam and Follower Automotive Valve Gear, Tribology International, 13(3), 1980, 121-132
[26] Jamali, H.U., Al-Hamood, A., Abdullah, O.I., Senatore, A., Schlattmann, J., Lubrication Analyses of Cam and Flat-Faced Follower, Lubricants, 7(4), 2019, 31.
[27] Taylor, C.M., Fluid film lubrication in automobile valve trains, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 208(4), 1994, 221-234. | ||
|
آمار تعداد مشاهده مقاله: 1,005 تعداد دریافت فایل اصل مقاله: 2,144 |
||