آمار
| تعداد نشریات | 31 |
| تعداد شمارهها | 1,030 |
| تعداد مقالات | 9,108 |
| تعداد مشاهده مقاله | 10,317,308 |
| تعداد دریافت فایل اصل مقاله | 8,548,283 |
3D Numerical Investigation of Heat Transfer Performance in Liquid-liquid Taylor Flow | ||
| Journal of Applied and Computational Mechanics | ||
| دوره 10، شماره 1، فروردین 2024، صفحه 183-204 اصل مقاله (2.99 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22055/jacm.2023.44421.4211 | ||
| نویسندگان | ||
| MOHAMMED SAID* 1؛ NOURA NAIT BOUDA1؛ SOUAD HARMAND2 | ||
| 1Department of Energetic and Fluid Mechanics, University of Science and Technology Houari Boumediene (USTHB), P56J+GMH, Algiers, 16111, Algeria | ||
| 2Department of Mechanics, Polytechnic University of Hauts de France (UPHF), Campus Mont Houy, Valenciennes, 59313, France | ||
| چکیده | ||
| With recent advances in semiconductor technology, conventional cooling methods and standard coolants are no longer adequate to manage electronic chips’ enormous heat generation. Therefore, innovative cooling solutions are required to maintain these devices at optimum operating temperatures. Taylor flow in microchannels is an effective technique that allows excellent mixing of two fluids, which is crucial for heat transfer. A 3D numerical analysis of the heat transfer performance of liquid-liquid Taylor flow in a rectangular microchannel was carried out by ANYSY Fluent. Water droplets were dispersed in either ethylene or propylene glycol, with the interface between the two fluids captured using the Volume of Fluid method. For optimal computational time, two symmetries in the XY and XZ planes are considered. Furthermore, mesh size refinement was performed in the near-wall region to capture the liquid film. An analysis of the effect of plug/slug length and liquid film thickness is conducted with initially constant thermo-physical properties. This assumption was considered to analyse the heat transfer process and determine the most critical parameter affecting heat transfer performance. A user-defined function is then implemented in ANSYS Fluent to examine the effect of working fluids temperature-dependent viscosity change on the heat transfer rate. Conjugate heat transfer and axial conduction are also examined, as these two factors can significantly affect the thermal behaviour inside the microchannel and enable the achievement of realistic and accurate results. The results reveal that Taylor liquid-liquid flow can increase the heat transfer rate by up to 440% over single-phase flow. It was also found that the temperature-dependent viscosity of the working fluids significantly affects the plug/slug length and liquid film thickness, resulting in a 20.8% improvement in heat transfer rate compared with constant thermo-physical properties. This study will improve the state of knowledge on heat transfer by Taylor flow in microchannels and factors that can influence it, and highlight the significance of this flow pattern in enhancing heat transfer performance over single-phase flow. | ||
| کلیدواژهها | ||
| 3D simulation؛ Taylor flow؛ heat transfer؛ liquid film؛ microchannel | ||
| مراجع | ||
|
[1] Agostini, B., Fabbri, M., Park, J.E., Wojtan, L., Thome, J.R., Michel, B., State of the art of high heat flux cooling technologies, Heat Transfer Engineering, 28(4), 2007, 258–281, 2007, doi: 10.1080/01457630601117799.
[2] Japar, W.M.A.A., Sidik, N.A.C., Saidur, R., Asako, Y., Nurul Akmal Yusof, S., A review of passive methods in microchannel heat sink application through advanced geometric structure and nanofluids: Current advancements and challenges, Nanotechnology Reviews, 9(1), 2020, 1192–1216, doi: 10.1515/ntrev-2020-0094.
[3] Go, J.S., Design of a microfin array heat sink using flow-induced vibration to enhance the heat transfer in the laminar flow regime, Sensors & Actuators A, 105(2), 2003, 201–210, doi: 10.1016/S0924-4247(03)00101-8.
[4] Krishnaveni, T., Renganathan, T., Picardo, J.R., Pushpavanam, S., Numerical study of enhanced mixing in pressure-driven flows in microchannels using a spatially periodic electric field, Physical Review E, 96(3), 2017, 1–15, doi: 10.1103/PhysRevE.96.033117.
[5] Hessami, M.A., Berryman, A., Bandopdhayay, P., Heat transfer enhancement in an electrically heated horizontal pipe due to flow pulsation, ASME International Mechanical Engineering Congress and Exposition, 37181, 2003, 49-56.
[6] Alam, T., Lee, P.S., Yap, C.R., Effects of surface roughness on flow boiling in silicon microgap heat sinks, International Journal of Heat and Mass Transfer, 64, 2013, 28–41, doi: 10.1016/j.ijheatmasstransfer.2013.04.009.
[7] Xie, G., Zhang, F., Sundén, B., Zhang, W., Constructal design and thermal analysis of microchannel heat sinks with multistage bifurcations in single-phase liquid flow, Applied Thermal Engineering, 62(2), 2014, 791-802, doi: 10.1016/j.applthermaleng.2013.10.042.
[8] Sui, Y., Teo, C.J., Lee, P.S., Chew, Y.T., Shu, C., Fluid flow and heat transfer in wavy microchannels, International Journal of Heat and Mass Transfer, 53(13-14), 2010, 2760-2772, doi: 10.1016/j.ijheatmasstransfer.2010.02.022.
[9] Zhou, Y.L., Chang, H., Numerical simulation of hydrodynamic and heat transfer characteristics of slug flow in serpentine microchannel with various curvature ratio, Heat and Mass Transfer, 55, 2019, 3343-3358, doi: 10.1007/s00231-019-02664-4.
[10] Zhang, J., Fletcher, D.F., Li, W., Heat transfer and pressure drop characteristics of gas–liquid Taylor flow in mini ducts of square and rectangular cross-sections, International Journal of Heat and Mass Transfer, 103, 2016, 45-56, doi: 10.1016/j.ijheatmasstransfer.2016.07.007.
[11] Eain, M.M.G., Egan, V., Punch, J., Local Nusselt number enhancements in liquid–liquid Taylor flows, International Journal of Heat and Mass Transfer, 80, 2015, 85-97, doi: 10.1016/j.ijheatmasstransfer.2014.09.009.
[12] Xia, G.D., Liu, R., Wang, J., Du, M., The characteristics of convective heat transfer in microchannel heat sinks using Al2O3 and TiO2 nanofluids, International Communications in Heat and Mass Transfer, 76, 2016, 256-264, doi: 10.1016/j.icheatmasstransfer.2016.05.034.
[13] Kovalev, A.V., Yagodnitsyna, A.A., Bilsky, A.V., Flow hydrodynamics of immiscible liquids with low viscosity ratio in a rectangular microchannel with T-junction, Chemical Engineering Journal, 352, 2018, 120-132, doi: 10.1016/j.cej.2018.07.013.
[14] Li, Q., Angeli, P., Experimental and numerical hydrodynamic studies of ionic liquid-aqueous plug flow in small channels, Chemical Engineering Journal, 328, 2017, 717-736, doi: 10.1016/j.cej.2017.07.037.
[15] Eain, M.M.G., Egan, V., Punch, J., Film thickness measurements in liquid–liquid slug flow regimes, International Journal of Heat and Fluid Flow, 44, 2013, 515-523, doi: 10.1016/j.ijheatfluidflow.2013.08.009.
[16] Ma, H., Zhao, Q., Yao, C., Zhao, Y., Chen, G., Effect of fluid viscosities on the liquid-liquid slug flow and pressure drop in a rectangular microreactor, Chemical Engineering Science, 241, 2021, 116697, doi: 10.1016/j.ces.2021.116697.
[17] Abiev, R.S., Effect of contact-angle hysteresis on the pressure drop under slug flow conditions in minichannels and microchannels, Theoretical Foundations of Chemical Engineering, 49, 2015, 414-421, doi: 10.1134/S0040579515040223.
[18] Abiev, R.S., Analysis of local pressure gradient inversion and form of bubbles in Taylor flow in microchannels, Chemical Engineering Science, 174, 2017, 403-412, doi: 10.1016/j.ces.2017.09.041.
[19] Abdollahi, A., Norris, S.E., Sharma, R.N., Fluid flow and heat transfer of liquid-liquid Taylor flow in square microchannels, Applied Thermal Engineering, 172, 2020, 115123, doi: 10.1016/j.applthermaleng.2020.115123.
[20] Adrugi, W., Muzychka, Y., Pope, K., Heat Transfer in Liquid–Liquid Taylor Flow in Miniscale Curved Tubing for Constant Wall Temperature, Journal of Electronic Packaging, 139(2), 2017, 020909, doi: 10.1115/1.4036405.
[21] Asthana, A., Zinovik, I., Weinmueller, C., Poulikakos, D., Significant Nusselt number increase in microchannels with a segmented flow of two immiscible liquids: An experimental study, International Journal of Heat and Mass Transfer, 54(7-8), 2011, 1456-1464, doi: 10.1016/j.ijheatmasstransfer.2010.11.048.
[22] Dai, Z., Guo, Z., Fletcher, D.F., Haynes, B.S., Taylor flow heat transfer in microchannels—Unification of liquid–liquid and gas–liquid results, Chemical Engineering Science, 138, 2015, 140-152, doi: 10.1016/j.ces.2015.08.012.
[23] Abdollahi, A., Fluid flow and heat transfer of liquid-liquid Taylor flow in microchannels, Ph.D. Thesis, The University of Auckland, Auckland, New Zealand, 2019, http://hdl.handle.net/2292/51345.
[24] Urbant, P., Leshansky, A., Halupovich, Y., On the forced convective heat transport in a droplet-laden flow in microchannels, Microfluidics and Nanofluidics, 4, 2008, 533-542, doi: 10.1007/s10404-007-0211-2.
[25] Fischer, M., Juric, D., Poulikakos, D., Large convective heat transfer enhancement in microchannels with a train of coflowing immiscible or colloidal droplets, Journal of Heat Transfer, 132, 2010, doi: 10.1115/1.4002031.
[26] Che, Z., Wong, T.N., Nguyen, N.T., Heat transfer enhancement by recirculating flow within liquid plugs in microchannels, International Journal of Heat and Mass Transfer, 55(7-8), 2012, 1947-1956, doi: 10.1016/j.ijheatmasstransfer.2011.11.050.
[27] Che, Z., Wong, T.N., Nguyen, N.T., Yang, C., Three dimensional features of convective heat transfer in droplet-based microchannel heat sinks, International Journal of Heat and Mass Transfer, 86, 2015, 455-464, doi: 10.1016/j.ijheatmasstransfer.2015.03.030.
[28] Bordbar, A., Kamali, R., Taassob, A., Thermal performance analysis of slug flow in square microchannels, Heat Transfer Engineering, 41(1), 2020, 84-100, doi: 10.1080/01457632.2018.1513630.
[29] Vivekanand, S.V.B., Raju, V.R.K., Numerical study of the hydrodynamics and heat transfer characteristics of liquid–liquid Taylor flow in microchannel, Heat Transfer—Asian Research, 47(6), 2018, 794-805, doi: 10.1002/htj.21341.
[30] Chandrasekhar, S.,Raju, V.R.K., Two-phase flow and heat transfer through wavy microchannel, 2020, 59–65, [Online]. Available: https://www.theijes.com/papers/NHTFF-2020/Volume -2/10, 59-65.pdf.
[31] Li, X., He, L., Qian, P., Huang, Z., Luo, C., Liu, M., Heat transfer enhancement of droplet two-phase flow in cylindrical microchannel, Applied Thermal Engineering, 186, 2021, 116474, doi: 10.1016/j.applthermaleng.2020.116474.
[32] Chandrasekhar, S., Raju, V.R.K., Boundary Condition Effect on Two-Phase Fluid Flow and Heat Transfer inside 3-D Microchannels, Journal of Applied Fluid Mechanics, 14(6), 2021, 1755-1765, doi: 10.47176/jafm.14.06.32493.
[33] Hirt, C.W., Nichols, B.D., Volume of fluid (VOF) method for the dynamics of free boundaries, Journal of Computational Physics, 39(1), 1981, 201-225, doi: 10.1016/0021-9991(81)90145-5.
[34] Asadolahi, A.N., Gupta, R., Fletcher, D.F., Haynes, B.S., CFD approaches for the simulation of hydrodynamics and heat transfer in Taylor flow, Chemical Engineering Science, 66(22), 2011, 5575-5584, doi: 10.1016/j.ces.2011.07.047.
[35] Khan, W., Chandra, A.K., Kishor, K., Sachan, S., Alam, M.S., Slug formation mechanism for air–water system in T-junction microchannel: a numerical investigation, Chemical Papers, 72, 2018, 2921-2932, doi: 10.1007/s11696-018-0522-7.
[36] Brackbill, J.U., Kothe, D.B., Zemach, C., A continuum method for modeling surface tension, Journal of Computational Physics, 100(2), 1992, 335-354, doi: 10.1016/0021-9991(92)90240-Y.
[37] Murshed, S.S., De Castro, C.N., A critical review of traditional and emerging techniques and fluids for electronics cooling, Renewable and Sustainable Energy Reviews, 78, 2017, 821-833, doi: 10.1016/j.rser.2017.04.112.
[38] Sekrani, G., Poncet, S., Ethylene-and propylene-glycol based nanofluids: a literature review on their thermophysical properties and thermal performances, Applied Sciences, 8(11), 2018, 2311, doi: 10.3390/app8112311.
[39] Cas, N., Information en matière de sécurité donnée volontairement au sens du formulaire FDS conformément au Règlement ( CE ) N ° 1907 / 2006 ( REACH ) RUBRIQUE 1 : Identification de la substance / du mélange et de la société / l ’ entreprise Information en matière, 2006, 2021, 1–14.
[40] Said, M., Nait Bouda, N., Harmand, S., Numerical Investigation of Flow Patterns and Plug Hydrodynamics in a 3D T-junction Microchannel, Microgravity Science and Technology, 35(1), 2023, 8, doi: 10.1007/s12217-022-10026-9.
[41] Dombrowski, N., Foumeny, E.A., Ookawara, S., Riza, A., The influence of Reynolds number on the entry length and pressure drop for laminar pipe flow, The Canadian Journal of Chemical Engineering, 71(3), 1993, 472-476, doi: 10.1002/cjce.5450710320.
[42] Gupta, R., Fletcher, D.F., Haynes, B.S., On the CFD modelling of Taylor flow in microchannels. Chemical Engineering Science, 64(12), 2009, 2941-2950, doi: 10.1016/j.ces.2009.03.018.
[43] ANSYS, ANSYS FLUENT User’s Guide, vol. 15317, no. October. 2012.
[44] Yao, C., Zheng, J., Zhao, Y., Zhang, Q., Chen, G., Characteristics of gas-liquid Taylor flow with different liquid viscosities in a rectangular microchannel, Chemical Engineering Journal, 373, 2019, 437-445, doi: 10.1016/j.cej.2019.05.051.
[45] Kreutzer, M.T., Kapteijn, F., Moulijn, J.A., Heiszwolf, J.J., Multiphase monolith reactors: chemical reaction engineering of segmented flow in microchannels, Chemical Engineering Science, 60(22), 2005, 5895-5916, doi: 10.1016/j.ces.2005.03.022.
[46] Walsh, P.A., Walsh, E.J., Muzychka, Y.S., Heat transfer model for gas–liquid slug flows under constant flux, International Journal of Heat and Mass Transfer, 53(15-16), 2010, 3193-3201, doi: 10.1016/j.ijheatmasstransfer.2010.03.007.
[47] Che, Z., Wong, T.N., Nguyen, N.T., Heat transfer enhancement by recirculating flow within liquid plugs in microchannels, International Journal of Heat and Mass Transfer, 55(7-8), 2012, 1947-1956, doi: 10.1016/j.ijheatmasstransfer.2011.11.050.
[48] Muzychka, Y.S., Walsh, E., Walsh, P., Simple models for laminar thermally developing slug flow in noncircular ducts and channels, Journal of Heat Transfer, 132, 2010, doi: 10.1115/1.4002095.
[49] Abadie, T., Xuereb, C., Legendre, D., Aubin, J., Mixing and recirculation characteristics of gas–liquid Taylor flow in microreactors, Chemical Engineering Research and Design, 91(11), 2013 2225-2234, doi: 10.1016/j.cherd.2013.03.003.
[50] Talimi, V., Muzychka, Y.S., Kocabiyik, S., Effects of film thickness on heat transfer in taylor flows under constant wall heat flux boundary condition, ASME International Mechanical Engineering Congress and Exposition, 45233, 2012, 2033-2040, doi: 10.1115/IMECE2012-86123.
[51] Sawicka, D., Cieśliński, J.T., Smolen, S., A comparison of empirical correlations of viscosity and thermal conductivity of water-ethylene glycol-Al2O3 nanofluids, Nanomaterials, 10(8), 2020, 1487, doi: 10.3390/nano10081487.
[52] Sagdeev, D.I., Fomina, M.G., Abdulagatov, I.M., Density and viscosity of propylene glycol at high temperatures and high pressures, Fluid Phase Equilibria, 450, 2017, 99-111, doi: 10.1016/j.fluid.2017.07.006.
[53] Maranzana, G., Perry, I., Maillet, D., Mini-and micro-channels: influence of axial conduction in the walls, International Journal of Heat and Mass Transfer, 47(17-18), 2004, 3993-4004, doi: 10.1016/j.ijheatmasstransfer.2004.04.016.
[54] Mehta, B., Khandekar, S., Measurement of local heat transfer coefficient during gas–liquid Taylor bubble train flow by infra-red thermography, International Journal of Heat and Fluid Flow, 45, 2014, 41-52, doi: 10.1016/j.ijheatfluidflow.2013.12.001. | ||
|
آمار تعداد مشاهده مقاله: 319 تعداد دریافت فایل اصل مقاله: 589 |
||