آمار
| تعداد نشریات | 31 |
| تعداد شمارهها | 1,030 |
| تعداد مقالات | 9,108 |
| تعداد مشاهده مقاله | 10,317,133 |
| تعداد دریافت فایل اصل مقاله | 8,548,246 |
Thermal Behavior of Mesoporous Aramid Fiber Reinforced Silica Aerogel Composite for Thermal Insulation Applications: Microscale Modeling | ||
| Journal of Applied and Computational Mechanics | ||
| دوره 10، شماره 1، فروردین 2024، صفحه 140-151 اصل مقاله (1.64 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22055/jacm.2023.44601.4247 | ||
| نویسندگان | ||
| Wiem Nasri1؛ Ridha Djebali* 2؛ Ali Jawad Chamkha3؛ Abderrezak Bezazi4؛ Farid Mechighel5، 6؛ Paulo Reis7؛ Zied Driss1 | ||
| 1Laboratory of Electro-Mechanic Systems (LASEM), National School of Engineers of Sfax (ENIS), University of Sfax (US), B.P. 1173, Road Soukra km 3.5, 3038 Sfax, Tunisia | ||
| 2UR: Modeling, Optimization and Augmented Engineering, ISLAI Béja, University of Jendouba, Béja 9000, Tunisia | ||
| 3Kuwait College of Science & Technology, Doha, Kuwait | ||
| 4Laboratory of Applied Mechanics of New Materials (LMANM), University May 08, 1945, B.P. 401 Guelma 24000, Algeria | ||
| 5LR3MI Laboratory, Department of Mechanical Engineering, Faculty of Engineering Sciences, Annaba University, BP. 12, 23000 Annaba, Algeria | ||
| 6SPCTS Laboratory, University of Limoges, Limoges, France | ||
| 7Department of Mechanical Engineering, CEMMPRE, University of Coimbra, Coimbra, Portugal | ||
| چکیده | ||
| This paper explores the incorporation of aramid fibers, recognized for their high mechanical flexibility and low thermal conductivity (TC), to serve as reinforcing agents within the highly porous aerogel matrix in order to overcome their fragility and weak mechanical structure that impose limitations on their practical utility especially in piping insulation. The thermal properties are determined using a micromechanical modeling approach that considers parameters such as temperature, fiber volume fraction, thermal conductivity, and porosity of the silica aerogel. For specific conditions, including an Aramid fiber radius of 6 microns, a silica aerogel thermal conductivity of 0.017 W.m-1.K-1, and a porosity of 95%, the resulting AFRA composite exhibits an Effective Thermal Conductivity (ETC) of 0.0234 W.m-1.K-1. Notably, this value is lower than the thermal conductivity of air at ambient temperature. The findings are further validated through experimental and analytical techniques. A response surface methodology (RSM) based on Box-Behnken design (BBD) is employed. This approach leads to the development of a quadratic equation intricately relating the key parameters to the ETC of the AFRA. The aim is optimization, identifying target optimal values for these parameters to further enhance the performance of AFRA composites. | ||
| کلیدواژهها | ||
| Aramid fiber reinforced silica aerogel composite؛ micromechanical modeling؛ thermal conductivity؛ porous materials؛ thermal insulation؛ RSM | ||
| مراجع | ||
|
[1] Bakatovich, A., Gaspar, F., Composite material for thermal insulation based on moss raw material, Construction and Building Materials, 228, 2019, 116699.
[2] Papadopoulos, A.M., State of the art in thermal insulation materials and aims for future developments, Energy and Buildings, 37, 2005, 77–86.
[3] Miguel, A.C.G., Silva, F.C., Da Silva, G., Sciamareli, J., Da Costa Mattos, E., A Short Review about Aerospace Materials Characterization Bonding Agents and Thermal Insulation, Propellants, Explosives, Pyrotechnics, 45, 2020, 1175–1184.
[4] Fesmire, J.E., Layered composite thermal insulation system for nonvacuum cryogenic applications, Cryogenics, 74, 2016, 154–165.
[5] Gurav, J.L., Jung, I.K., Park, H.H., Kang, E.S., Nadargi, D.Y., Silica Aerogel: Synthesis and applications, Journal of Nanomaterials, 2010, 2010, 1-11.
[6] Dorcheh, A.S., Abbasi, M.H., Silica aerogel; synthesis, properties and characterization, Journal of Materials Processing Technology, 199, 2008, 10–26.
[7] Chandrasekaran, S., Lin, D., Li, Y., Worsley, M.A., Chandrasekaran, S., Lin, D., Li, Y., et al. Aerogels, additive manufacturing, and energy storage, Joule, 7, 2023, 866-883.
[8] Singh, S., Bhatnagar, A., Dixit, V., Shukla, V., Shaz, M.A., Sinha, A., et al., Synthesis, characterization and hydrogen storage characteristics of ambient pressure dried carbon aerogel, International Journal of Hydrogen Energy, 41, 2016, 3561–3570.
[9] Kim, T.-H., Parale, V.G., Jung, H.N.R., Kim, Y., Driss, Z., Driss, D., et al., Facile synthesis of SNO2 Aerogel/Reduced graphene oxide nanocomposites via in situ annealing for the photocatalytic degradation of methyl orange, Nanomaterials, 9, 2019, 358.
[10] Zhao, J., Lu, C., He, X., Zhang, X., Zhang, W., Zhang, X., Polyethylenimine-Grafted cellulose nanofibril aerogels as versatile vehicles for drug delivery, ACS Applied Materials & Interfaces, 7, 2015, 2607–2615.
[11] Buratti, C., Moretti, E., Belloni, E., Aerogel plasters for building energy efficiency, Springer, 2016
[12] Randall, J.P., Meador, M.A.B., Jana, S.C., Tailoring mechanical properties of aerogels for aerospace applications, ACS Applied Materials & Interfaces, 3, 2011, 613–626.
[13] Mahesh, R., Mahabaleshwar, U.S., Kumar, P., Öztop, H.F., Abu‐Hamdeh, N.H., Impact of radiation on the MHD couple stress hybrid nanofluid flow over a porous sheet with viscous dissipation, Results in Engineering, 17, 2023, 100905.
[14] Bhatti, M.M., Sait, S.M., Ellahi, R., Sheremet, M.A., Öztop, H.F., Thermal analysis and entropy generation of magnetic Eyring-Powell nanofluid with viscous dissipation in a wavy asymmetric channel, International Journal of Numerical Methods for Heat & Fluid Flow, 2022.
[15] Manna, N.K., Biswas, N., Mandal, D.K., Sarkar, U.K., Öztop, H.F., Abu‐Hamdeh, N.H., Impacts of heater-cooler position and Lorentz force on heat transfer and entropy generation of hybrid nanofluid convection in quarter-circular cavity, International Journal of Numerical Methods for Heat & Fluid Flow, 33, 2022, 1249–1286.
[16] Sheikholeslami, M., Numerical investigation for CuO-H2O nanofluid flow in a porous channel with magnetic field using mesoscopic method, Journal of Molecular Liquids, 249, 2018, 739–746.
[17] Sheikholeslami, M., Influence of magnetic field on Al2O3-H2O nanofluid forced convection heat transfer in a porous lid driven cavity with hot sphere obstacle by means of LBM, Journal of Molecular Liquids, 263, 2018, 472–488.
[18] Zhi, L., Gong, L., He, S., Li, C., Flexible silica aerogel composites strengthened with aramid fibers and their thermal behavior, Materials & Design, 99, 2016, 349–355.
[19] Li, Z., He, S., Shi, X., Gong, L., Aramid fibers reinforced silica aerogel composites with low thermal conductivity and improved mechanical performance, Composites Part A: Applied Science and Manufacturing, 84, 2016, 316–325.
[20] Almeida, C.M.R., Ghica, M.E., Ramalho, A., Durães, L., Silica-based aerogel composites reinforced with different aramid fibres for thermal insulation in Space environments, Journal of Materials Science, 56, 2021, 13604–13619.
[21] Wu, H., Liao, Y., Ding, Y., Wang, H., Peng, C., Yin, S., Engineering thermal and mechanical properties of multilayer aligned Fiber-Reinforced aerogel composites, Heat Transfer Engineering, 35, 2014, 1061–1070.
[22] Zhao, J.J., Duan, Y.Y., Wang, X.D., Wang, B.X., Combined radiation and conduction heat transfer in nanocomposite insulation materials, Journal of Engineering Thermophysics, 33, 2012, 2185-2189.
[23] Xie, T., He, Y., Hu, Z., Theoretical study on thermal conductivities of silica aerogel composite insulating material, International Journal of Heat and Mass Transfer, 58, 2013, 540–552.
[24] Xia, Z., Zhang, Y., Ellyin, F., A unified periodical boundary conditions for representative volume elements of composites and applications, International Journal of Solids and Structures, 40, 2003, 1907–1921.
[25] Li, S., Boundary conditions for unit cells from periodic microstructures and their implications, Composites Science and Technology, 68, 2008, 1962–1974.
[26] Dong, K., Liu, K., Zhang, Q., Gu, B., Sun, B., Experimental and numerical analyses on the thermal conductive behaviors of carbon fiber/epoxy plain woven composites, International Journal of Heat and Mass Transfer, 102, 2016, 501–517.
[27] Pilling, M., Yates, B., Black, M., Tattersall, P., The thermal conductivity of carbon fibre-reinforced composites, Journal of Materials Science, 14, 1979, 1326–1338.
[28] Kulkarni, M., Brady, R.P., A model of global thermal conductivity in laminated carbon/carbon composites, Composites Science and Technology, 57, 1997, 277–285. | ||
|
آمار تعداد مشاهده مقاله: 660 تعداد دریافت فایل اصل مقاله: 728 |
||