Oil Immersed Distribution Transformer HST Reduction using Vegetable Oils and ONAN Cooling

[1] Rajab, A., Sulaeman, A., Sudirham, S., Suwarno, S., A comparison of dielectric properties of palm oil with mineral and synthetic types insulating liquid under temperature variation, Journal of Engineering and Technological Sciences, 43(3), 2001, 191-208.
[2]  McShane, C.P., Relative properties of the new combustion-resist vegetable-oil-based dielectric coolants for distribution and power transformers, IEEE Transactions on Industry Applications, 37(4), 2001, 1132–1139.
[3] Bashi, S.M., Abdullahi, U.U., Yunus, R., Nordin, A., Use of natural vegetable oils as alternative dielectric transformer coolants, Journal - The Institution of Engineers, Malaysia, 67(2), 2006, 4-9.
[4] Dasgupta, I., Design of transformers, McGraw-Hill, 2002.
[5] Kulkarni, S.V., Khaparde, S.A., Transformer Engineering; Design and Practice, CRC Press, 2004.
[6] IEC 60076-7, Power Transformers-Part 7: loading guide for oil-immersed power transformers, 2005.
[7] Fernández, I., Ortiz, A., Delgado, F., Renedo, C., Perez, S., Comparative evaluation of alternative fluids for power transformers, Electric Power Systems Research, 98, 2013, 58-69.
[8] Rafiq, M., Lv, Y.Z., Zhou, Y., Ma, K.B., Wang, W., Li, C.R., Wang, Q., Use of vegetable oils as transformer oils – a review, Renewable and Sustainable Energy Reviews, 52, 2015, 308-324.
[9] Martin, D., Wang, Z.D., Statistical analysis of the AC breakdown voltages of ester based transformer oils, IEEE Transactions on Dielectrics and Electrical Insulation, 15(4), 2008, 1044-1050.
[10] Tenbohlen, S., Koch, M., Aging performance and moisture solubility of vegetable oils for power transformers, IEEE Transactions on Power Delivery, 25(2), 2010, 825-830.
[11] Oommen, T.V., Vegetable oils for liquid-filled transformers, IEEE Electrical Insulation Magazine, 18(1), 2002, 6-11.
[12] Martin, D., Saha, T., Mcpherson, L., Condition monitoring of vegetable oil insulation in in-service power transformers: some data spanning 10 years, IEEE Electrical Insulation Magazine, 33(2), 2017, 44-51.
[13] Feil, D.L.P, Silva, P.R., Bernardon, D.P., Marchesan, T.B., Sperandio, M., Medeiros, L.H., Development of an efficient distribution transformer using amorphous core and vegetable insulating oil, Electric Power Systems Research, 144, 2017, 268-279.
[14] Zhang, J., Li, X., Oil cooling for disk-type transformer windings—Part II: parametric studies of design parameters, IEEE Transactions on Power delivery, 21(3), 2006, 1326-1332.
[15] Rahimpour, E., Barati, M., Schäfer, M., An investigation of parameters affecting the temperature rise in windings with zigzag cooling flow path, Applied Thermal Engineering, 27, 2007, 1923-1930.
[16] Taghikhani, M.A., Gholami, A., Estimation of hottest spot temperature in power transformer windings with NDOF and DOF cooling, Scientia Iranica, Transactions D: Computer Science & Engineering and Electrical Engineering, 16(2), 2009, 163-170.
[17] Torriano, F., Chaaban, M., Picher, P., Numerical study of parameters affecting the temperature distribution in a disc-type transformer winding, Applied Thermal Engineering, 30, 2010, 2034-2044.
[18] Taghikhani, M.A., Modeling of heat transfer in layer-type power transformer, Przeglad Elektrotechniczny, 87(12), 2011, 121-123.
[19] Skillen, A., Revell, A., Iacovides, H., Wu, W., Numerical prediction of local hot-spot phenomena in transformer windings, Applied Thermal Engineering, 36, 2012, 96-105.
[20] Coddé, J., Veken, W.V.D, Baelmans, M., Assessment of a hydraulic network model for zig-zag cooled power transformer windings, Applied Thermal Engineering, 80, 2015, 220-228.
[21] Liu, C., Ruan, J., Wen, W., Gong, R., Liao, C., Temperature rise of a dry-type transformer with quasi-3D coupled-field method, IET Electric Power Applications, 10(7), 2016, 598–603.
[22] Silva, J.R.D., Bastos, J.P.A., On-line evaluation of power transformer temperatures using magnetic and thermodynamics numerical modeling, IEEE Transactions on Magnetics, 53(6), 2017, 8106104.
[23] Das, A.K., Chatterjee, S., Finite element method-based modelling of flow rate and temperature distribution in an oil-filled disc-type winding transformer using COMSOL multiphysics, IET Electric Power Applications, 11(4), 2017, 664–673.
[24] Garelli, L., Ríos Rodriguez, G.A., Kubiczek, K., Lasek, P., Stepien, M., Smolka, J., Storti, M.,  Pessolani, F., Amadei, M., Thermo-magnetic-fluid dynamics analysis of an ONAN distribution transformer cooled with mineral oil and biodegradable esters, Thermal Science and Engineering Progress, 23, 2021, 100861.
[25] de  Melo, A.S., Calil, W.V., Salazar, P.D.P., Liboni, L.H.B., Costa, E.C.M., Flauzino, R.A., Applied methodology for temperature numerical evaluation on high current leads in power transformers, International Journal of Electrical Power and Energy Systems , 131, 2021, 107014.
[26] Herrera, S., Bonkers about biofuels, Nature Biotechnology, 24, 2006, 755-760.
[27] Qiu, F., Li, Y., Yang, D., Li, X., Sun, P., Biodiesel production from mixed soybean oil and rapeseed oil, Applied Energy, 88(6), 2011, 2050-2055.
[28] Sitorus, H.B.H., Beroual, A., Setiabudy, R., Bismo, S., Pre-breakdown phenomena in new vegetable oil-based Jatropha Curcas seeds as substitute of mineral oil in high voltage equipment, IEEE Transactions on Dielectrics and Electrical Insulation, 22(5), 2015, 2442-2448.
[29] Mariprasath, T., Kirubakaran, V., A critical review on the characteristics of alternating liquid dielectrics and feasibility study on pongamia pinnata oil as liquid dielectrics, Renewable and Sustainable Energy Reviews, 65, 2016, 784-799.
[30] Raeisian, L., Niazmand, H., Ebrahimnia-Bajestan, E., Werle, P., Feasibility study of waste vegetable oil as an alternative cooling medium in transformers, Applied Thermal Engineering, 151, 2019, 308-317.
[31] Usman, M.A., Olanipekun, O.O., Henshaw, U.T., A comparative study of soya bean oil and palm kernel oil as alternatives to transformer oil, Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS), 3(1), 2012, 33-37.
[32] Taghikhani, M.A., Afshar, M.R., Fans arrangement analysis in oil forced air natural cooling method of power transformer radiator, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 235(4), 2021, 904-913.
[33] Taghikhani, Z., Taghikhani, M.A., Gharehpetian, G.B., Mineral oil based CuO nanofluid-immersed transformers analysis concerning the efficacy of nanocrystalline alloy core in reduction of losses and HST, Journal of Magnetism and Magnetic Materials, 537, 2021, 168184.
[34] Stebel, M., Kubiczek, K., Rodriguez, G.R., Palacz, M., Garelli, L., Melka, B., Haida, M., Bodys, J., Nowak, A.J, Lasek, P., Stepien, M., Pessolani, F., Amadei, M., Granata, D., Storti, M., Smolka, J., Thermal analysis of 8.5 MVA disk-type power transformer cooled by biodegradable ester oil working in ONAN mode by using advanced EMAG–CFD–CFD coupling, International Journal of Electrical Power and Energy Systems, 136, 2022, 107737.
[35] Smolka, J., Nowak, A.J., Experimental validation of the coupled fluid flow, heat transfer and electromagnetic numerical model of the medium-power dry-type electrical transformer, International Journal of Thermal Sciences, 47(10), 2008, 1393-1410
[36] Heidary, A., Taghikhani, M.A., Electromagnetic-mechanical-thermal amorphous core transformer simulation compare to conventional transformers using FEM, Modares Mechanical Engineering, 18(3), 2018, 95-106. (in Persian)
[37] Paramane, B., Veken, W.V.D., Sharma, A., A coupled internal–external flow and conjugate heat transfer simulations and experiments on radiators of a transformer, Applied Thermal Engineering, 103, 2016, 961-970.