آمار
| تعداد نشریات | 31 |
| تعداد شمارهها | 1,030 |
| تعداد مقالات | 9,097 |
| تعداد مشاهده مقاله | 10,334,992 |
| تعداد دریافت فایل اصل مقاله | 8,569,235 |
Theory and Experiment in Predicting the Strength of Hybrid Fiber Metal Laminates | ||
| Journal of Applied and Computational Mechanics | ||
| دوره 9، شماره 4، دی 2023، صفحه 987-999 اصل مقاله (1.23 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22055/jacm.2023.42798.3978 | ||
| نویسندگان | ||
| Mustafa Babanli1؛ Yunus Turen2؛ Nurlan Gurbanov* 1؛ Rafail Mehtiyev3؛ Mustafa Yunus Askin4؛ Mahmud Ismayilov5 | ||
| 1Department of Materials Science and Processing Technologies, Azerbaijan State Oil and Industry University, Azadlig 20, Baku, Az 1010, Azerbaijan | ||
| 2Department of Metallurgical and Materials Engineering, Karabuk University, Turkey | ||
| 3Department of General and Applied Mathematics, Azerbaijan State Oil and Industry University, Azadlig 20, Baku, Az 1010, Azerbaijan | ||
| 4Materials Research and Development Center, Iron & Steel Institute, Karabuk University, Turkey | ||
| 5Department of Mechanics, Azerbaijan State Oil and Industry University, Azadlig 20, Baku, Az 1010, Azerbaijan | ||
| چکیده | ||
| This article consists of three methodological stages. In the first one, a 3D numerical model of hybrid fiber metal laminates (FML) is developed inside ANSYS Workbench Explicit Dynamics modulus and used to predict their strengths according to the ASTM D3039M-17 standard. In the second stage, hybrid FMLs are produced according to the 4/3 stacking order in the laboratory environment, in line with the numerical model. Pure epoxy resin is initially used then reinforced with, 0.2% clay, GNP and SiO2 nanoparticles: comparative tensile tests are carried out according to the above-mentioned standards. At the final stage, experimental data, computer and theoretical (analytical) models of nanocrack formation processes in 7075-T6 Al matrix nanoparticle-filled hybrid nanocomposite materials under the influence of high-speed and quasi-static deformation regimes are investigated. It is observed that there is a 5% difference between results from simulation and experiment. | ||
| کلیدواژهها | ||
| Hybrid composite؛ fiber metal laminates (FML)؛ 7075-T6 Al؛ tensile test؛ ASTM D3039M-17؛ nanocrack؛ ANSYS Workbench | ||
| مراجع | ||
|
[1] Gurbanov, N.A., Babanli, M.B., Investigation of Effects of Graphene Nanoplatelets Addition on Mechanical Properties of 7075-T6 Aluminium Matrix Hybrid Fibre Metal Laminates, Metallophysics and Advanced Technologies, 43(12), 2021, 1589-1599.
[2] Asundi, A., Choi, A.Y.N., Fiber metal laminates: An advanced material for future aircraft, Journal of Materials Processing Technology, 63(1), 1997, 384-394.
[3] Baltaci, A., Sarikanat, M., Yildiz, H., Static stability of laminated composite circular plates with holes using shear deformation theory, Finite Elements in Analysis and Design, 43(11), 2007, 839-846.
[4] Dong, C., Multi-objective Optimal Design of Carbon and Glass Reinforced Hybrid Composites under Flexural Loading, Journal of Applied and Computational Mechanics, 8(4), 2022, 1324-1331.
[5] Botelho, E.C., Silva, R.A., Pardini, L.C., Rezende, M.C., A review on the development and properties of continuous fiber/epoxy/aluminum hybrid composites for aircraft structures, Materials Research, 9(3), 2006, 247-256.
[6] Gurbanov, N., Askin, M.Y., Babanli, M., Turen, Y., An investigation of mechanical properties of different nanoparticle reinforced 7075-T6 Al matrix hybrid fiber metal laminated composites, Functional Materials, 29(1), 2022, 172-181.
[7] Huang, S.H., Penk, L., Abhiram, M., Liang, H., Additive Manufacturing and Its Societal Impact:A Literature Review, The International Journal of Advanced Manufacturing Technology, 67(5), 2013, 1-25.
[8] Brown, M.A., Seugling, M.R., Using Plate Finite Elements for Modeling Fillets in Global Response Analysis, Finite Elements in Analysis and Design, 40, 2004, 1963-1975.
[9] Randjbaran, E., Majid, D.L., Zahari, R., Sultan, M.T., Mazlan N., Effects of volume of carbon nanotubes on the angled ballistic impact for carbon kevlar hybrid fabrics, Facta Universitatis, Series: Mechanical Engineering, 18(2), 2020, 229-244.
[10] Elizalde, H., Cárdenas, D., Delgado-Gutierrez, A., Probst O., In-plane shear-axial strain coupling formulation for shear- deformable composite thin-walled beams, Journal of Applied and Computational Mechanics, 7(2), 2021, 450-469.
[11] Barbero, E.J., Shahbazi, M., Determination of material properties for ANSYS progressive damage analysis of laminated composites, Materials Today: Proceedings, 176, 2017, 768-779.
[12] Abisset, E., Daghia, F., Ladeveze, P., On the validation of a damage mesomodel for laminated composites by means of open-hole tensile tests on quasi-isotropic laminates, Composites Part A, 42(10), 2011, 1515-1524.
[13] Ali, K.S.A., Manuel, J.D., Balamurugan, M., Murugan, M.S., Analysis of composite leaf spring using ANSYS software, Materials Today: Proceedings, 37(2), 2021, 2346-2351.
[14] Asadollahi, Y.E., Gardan, J., Lafon, P., Integrated design in additive manufacturing based on design for manufacturing. Int'l Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10(6), 2016, 1104-1111.
[15] Azizpooryan, M., Noormohammadi, N., Boroomand, B., Equilibrated Basis Functions for Static Analysis of In-plane Heterogeneous Laminated Composite Plates in Boundary and Meshfree Approaches, Iranian Journal of Science and Technology - Transactions of Mechanical Engineering, 46, 2022, 957–984.
[16] Bhagat, V.S., George, N., Arunkumar, M.P. et al., Numerical Analysis on Vibro-Acoustic Behavior of Honeycomb Core Sandwich Structure with FG-CNT-Reinforced Polymer Composite Facings, Iranian Journal of Science and Technology - Transactions of Mechanical Engineering, 46, 2022, 943–956.
[17] Rastgaar, A.M., Mahinfalah, M., Nakhaie, J.G., Linear static analysis and finite element modeling for laminated composite plates using third order shear deformation theory, Composite Structures, 62(1), 2003, 27-39.
[18] Onyibo, E.C., Safaei, B., Application of finite element analysis to honeycomb sandwich structures: a review, Reports in Mechanical Engineering, 3(1), 2022, 192-209.
[19] Askin, M.Y., Turen, Y., The effect of GNP addition on mechanical and residual stress properties of 2024-T3 aluminum and carbon fiber reinforced FML, Materials Research Express, 6, 2019, 126546
[20] Babanli, M.B., Gurbanov, N.A., Mehtiyev, R.K., Formation and Growth of Cracks in 7075-T6 Aluminium Matrix Hybrid FML Nanocomposite Materials, Progress in Physics of Meterials, 23(3), 2022, 489-509.
[21] Conrad, H., Narayan, J., Mechanism for grain size softening in nanocrystalline Zn, Applied Physics Letters, 81(12), 2002, 2241.
[22] Demkowicz, M.J., Argon, A.S., Farkas, D., Frary, M., Simulation of plasticity in nanocrystalline silicon, Philosophical Magazine, 87(28), 2007, 4253.
[23] Gutkin, M.Yu., Ovid’ko, I.A., Effect of triple junctions of nanotubes on strengthening and fracture toughness of ceramic nanocomposites, Physics of the Solid State, 52, 2010, 1397-1403.
[24] Meyers, M.A., Mishra, A., Benson, D.J., Mechanical properties of nanocrystalline materials, Progress in Materials Science, 51, 2006, 427–556.
[25] Padilla, H.A., Boyce, B.L., A Review of Fatigue Behavior in Nanocrystalline Metals, Experimental Mechanics, 50, 2010, 5-23.
[26] Faizan, M., Gangwar, S., Tensile behaviour of carbon fiber reinforced polymer composite using ANSYS 21, Materials Today: Proceedings, 46(15), 2021, 6519-6526.
[27] Binu, P.P., Georgeb, E., Vinodkumara, M.N., Effect of nanoclay, Cloisite15A on the Mechanical Properties and Thermal behavior of Glass Fiber Reinforced Polyester, Procedia Technology, 25, 2016, 846-853.
[28] Sydlik, S.A., Lee, J.H., Walish, J.J., Thomas, E.L., Swager, T.M., Epoxy functionalized multi-walled carbon nanotubes for improved adhesives, Carbon, 59, 2013, 109-120.
[29] Afrouzian, A., Aleni, H., Hossein, G., Ahmadi, H., Effect of nano-particles on the tensile, flexural and perforation properties of the glass/epoxy composites, Journal of Reinforced Plastics and Composites, 36(12), 2017, 900-916.
[30] Ovid’ko, I.A., Sheinerman, A.G., Cracks at disclinated grain boundaries in graphene, Journal of Physics D: Applied Physics, 46(34), 2013, 345305.
[31] Repetsky, S.P., Len, E.G., Lizunov, V.V., Metallofiz. Noveishie Tekhnol., 28(8), 2006, 989.
[32] Mura, T., Micromechanics of Defects in Solids, Dordrecht: Springer–Kluwer Academic, 1987.
[33] Zhuang, Z., Liu, Z., Cui Y., Dislocation Mechanism-Based Crystal Plasticity: Theory and Computation at the Micron and Submicron Scale, Academic Press, 2019.
[34] Fischer, L.L., Beltz, G.E., The effect of crack blunting on the competition between dislocation nucleation and cleavage, Journal of the Mechanics and Physics of Solids, 49(3), 2001, 635-654.
[35] Beltz, G.E., Lipkin, D.M., Fischer, L.L., Role of Crack Blunting in Ductile Versus Brittle Response of Crystalline Materials, Physical Review Letters, 82(22), 1999, 4468.
[36] Ovid’ko, I.A., Sheinerman, A.G., Ductile vs. brittle behavior of pre-cracked nanocrystalline and ultrafine-grained materials, Acta Materialia, 58(16), 2010, 5286-5294.
[37] Barenblatt, G.I., The Mathematical Theory of Equilibrium Cracks in Brittle Fracture, Advances in Applied Mechanics, 7, 1962, 55-129.
[38] Khan, A.S., Suh, Y.S., Kazmi, R., Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys, International Journal of Plasticity, 20(12), 2004, 2233-2248.
[39] Khana, A.S., Suha, Y.S., Chena, X., Takacs, L., Zhanga, H., Nanocrystalline aluminum and iron: Mechanical behavior at quasi-static and high strain rates, and constitutive modeling, International Journal of Plasticity, 22(2), 2006, 195-209.
[40] Hulbert, D.M., Jiang, D., Kuntz, J.D., Kodera, Y., Mukherjee, A.K., A low-temperature high-strain-rate formable nanocrystalline superplastic ceramic, Scripta Materialia, 56(12), 2007, 1103-1106.
[41] Guo, J., He, L., Liu, Y., Li, L., Anti-plane analysis of a reinforced nano-elliptical cavity or nano-crack in a magnetoelectroelastic matrix with surface effect, Theoretical and Applied Fracture Mechanics, 107, 2020, 102553.
[42] Liu, D., Cherns, D., Nano-cracks in a synthetic graphite composite for nuclear applications, Philosophical Magazine, 98(14), 2018, 1272-1283.
[43] Daia, K., Shaw, L., Analysis of fatigue resistance improvements via surface severe plastic deformation, International Journal of Fatigue, 30(8), 2008, 1398-1408. | ||
|
آمار تعداد مشاهده مقاله: 453 تعداد دریافت فایل اصل مقاله: 518 |
||