Finite Elements Analysis of the Hyperelastic Impeller Rotating in ‎the Self-Priming Pump

[1] Phillips, C., Pumps for moving juice, must and wine, Australian and New Zealand Grapegrower and Winemaker, 622, 2015.

[2] Hilton, W. H., NO. XVII. Pump for racking wine, Transactions Society, Instituted at London, for the Encouragement of Arts, Manufactures, and Commerce, 47, 1828, 160-162.

[3] Hilton, W. H. No. III. Pump for racking wine, Transactions Society, Instituted at London, for the Encouragement of Arts, Manufactures, and Commerce, 48, 1830, 70-72.

[4] Astall, R., Pumping wine-look for a happy marriage of speed and geometry, Australian Grapegrower and Winemaker, 373, 1995, 21-23.

[5] Kanute, J., Self‐priming centrifugal pumps: a primer, World Pumps, 456, 2004, 30-32.

[6] Wang, C., He, X., Zhang, D., Hu, B., Shi, W., Numerical and experimental study of the self‐priming process of a multistage self‐priming centrifugal pump, International Journal of Energy Research, 43(9), 2019, 4074-4092.

[7] Wang, C., Shi, W., Wang, X., Jiang, X., Yang, Y., Li, W., & Zhou, L., Optimal design of multistage centrifugal pump based on the combined energy loss model and computational fluid dynamics, Applied Energy, 187, 2017, 10-26.

[8] Li, X., Gao, P., Zhu, Z., Li, Y., Effect of the blade loading distribution on hydrodynamic performance of a centrifugal pump with cylindrical blades, Journal of Mechanical Science and Technology, 32(3), 2018, 1161-1170.

[9] Chang, H., Li, W., Shi, W., Liu, J., Effect of blade profile with different thickness distribution on the pressure characteristics of novel self-priming pump, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(11), 2018, 1-20.

[10] Mastrogiannakis, I., Vosniakos, G.-C., Exploring structural design of the francis hydro-turbine blades using composite materials, Facta Universitatis-Series Mechanical Engineering, 18(1), 2020, 43-55.

[11] Spasic, Ž., Jovanovic, M., Bogdanovic-Jovanovic, J., Milanovic, S., Numerical investigation of the influence of the doubly curved blade profiles on the reversible axial fan characteristics, Facta Universitatis-Series Mechanical Engineering, 18(1), 2020, 57-68.

[12] Wang, K., Zhang, Z., Jiang, L., Liu, H., Li, Y., Effects of impeller trim on performance of two-stage self-priming centrifugal pump, Advances in Mechanical Engineering, 9(2), 2017, 1-11.

[13] Gu, D., Liu, Z., Xie, Z., Li, J., Tao, C., Wang, Y., Numerical simulation of solid-liquid suspension in a stirred tank with a dual punched rigid-flexible impeller, Advanced Powder Technology, 2810, 2017, 2723-2734.

[14] Gu, D., Liu, Z., Quig, F., Li, J., Tao, C., Wang, Y., Design of impeller blades for efficient homogeneity of solid-liquid suspension in a stirred tank reactor, Advanced Powder Technology, 2810, 2017, 2514-2523.

[15] Yenigun, B., Gkouti, E., Czekanski, A., Barbaraci, G., Jankowski, K.P., Comparison of Elasto-Mechanical Behaviour of Rubbers, in Proc. of the Canadian Society for Mechanical Engineering International Congress, June 21-24, Charlottetown, PE, Canada, 2020.

[16] Bhowmick, A.K., Stephens H., Handbook of elastomers, CRC Press, 2000.

[17] Schaefer, R.J., Mechanical properties of rubber, Harris' Shock and Vibration Handbook, Sixth edition, Piersol, A. Paez T. (Eds), McGraw-Hill Companies Inc, 2010.

[18] Yenigun, B., Gkouti, E., Czekanski, A., Barbaraci, G., Jankowski, K.P., Comparison of Elasto-Mechanical Behaviour of Rubbers, in Proc. of the Canadian Society for Mechanical Engineering International Congress, June 21-24, Charlottetown, PE, Canada, 2020.

[19] Gajewski, M., Szczerba, R., Jemioło, S., Modelling of elastomeric bearings with application of Yeoh hyperelastic material model, Procedia Eng., 111, 2015, 220-227.

[20] Constantinou, M.C., Caccese, J., Harris, H.G., Frictional characteristics of Teflon–steel interfaces under dynamic conditions, Earthquake Engineering & Structural Dynamics, 15(6), 1987, 751-759.

[21] Bueche, A.M., Flom, D.G., Surface friction and dynamic mechanical properties of polymers, Wear, 2(3), 1959, 168-182.

[22] Pavlovic, A., Fragassa, C., Geometry optimization by fem simulation of the automatic changing gear, Reports in Mechanical Engineering, 1(1), 2020, 199-205.

[23] Pavlovic, A., Sintoni, D., Fragassa, C., Minak, G., Multi-objective design optimization of the reinforced composite roof in a solar vehicle, Applied Sciences, 10(8), 2020, 2665.

[23] Zhan, J., Fard, M., Jazar, R., A quasi-static FEM for estimating gear load capacity, Measurement, 75, 2015, 40-49.

[24] Altenbach, H., Eremeyev, V., Levdokymov, M., On the impact on a plate made of hyperelastic foam, in Proceedings of the 3rd International Conference on Nonlinear Dynamics, Kharkov, Ukraine, 2010.