Flow Regimes Characteristics of Water-crude Oil in a Rectangular ‎Y-microchannel

[1] Šalić, A., Tušek, A., Zelić, B., Application of microreactors in medicine and biomedicine, Journal of Applied Biomedicine, 10(3), 2012, 137–153.

[2] Tran, T.M., Lan, F., Thompson, C.S., Abate, A.R., From tubes to drops: Droplet-based microfluidics for ultrahigh-throughput biology, Journal of Physics D: Applied Physics, 46(11), 2013, 114004.

[3] Roberge, D.M., Ducry, L., Bieler, N., Cretton, P., Zimmermann, B., Microreactor Technology: A Revolution for the Fine Chemical and Pharmaceutical Industries?, Chemical Engineering Technology, 28(3), 2005, 318–323.

[4] Sobhan, C.B., Garimella, S.V., A comparative analysis of studies on heat transfer and fluid flow in microchannels, Microscale Thermophysical Engineering, 5(4), 2001, 293–311.

[5] Agostini, B., Fabbri, M., Park, J.E., Wojtan, L., Thome, J.R., Michel, B., State of the art of high heat flux cooling technologies, Heat Transfer Engineering, 28(4), 2007, 258–281.

[6] Kandlikar, S.G., Fundamental issues related to flow boiling in minichannels and microchannels, Experimental Thermal and Fluid Science, 26(2-4), 2002, 389–407.

[7] Kuznetsov, V.V., Shamirzaev, A.S., Kozulin, I.A., Kozlov, S.P., Correlation of the flow pattern and flow boiling heat transfer in microchannels, Heat Transfer Engineering, 34(2-3), 2013, 235–245.

[8] Sattari-Najafabadi, M., Esfahany, M.N., Wu, Z., Sunden, B., Mass transfer between phases in microchannels: A review, Chemical Engineering and Processing - Process Intensification, 127, 2018, 213–237.

[9] Mudawar, I., Two-phase microchannel heat sinks: Theory, applications, and limitations, Journal of Electronic Packaging, 133(4), 2011, 041002.

[10] Foroughi, H., Kawaji, M., Viscous oil-water flows in a microchannel initially saturated with oil: Flow patterns and pressure drop characteristics, International Journal of Multiphase Flow, 37(9), 2011, 1147–1155.

[11] Akbar, M.K., Plummer, D.A., Ghiaasiaan, S.M., Gas-liquid two-phase flow regimes in microchannels, ASME 2002 International Mechanical Engineering Congress and Exposition, New Orleans, Louisiana, USA, IMECE2002-39555, 2002.

[12] Dessimoz, A.L., Cavin, L., Renken, A., Kiwi-Minsker, L., Liquid-liquid two-phase flow patterns and mass transfer characteristics in rectangular glass microreactors, Chemical Engineering Science, 63(16), 2008, 4035–4044.

[13] Kashid, M.N., Agar, D.W., Hydrodynamics of liquid-liquid plug flow capillary microreactor: Flow regimes, plug size and pressure drop, Chemical Engineering Journal, 131(1-3), 2007, 1–13.

[14] Kashid, M.N., Renken, A., Kiwi-Minsker, L., Influence of flow regime on mass transfer in different types of microchannels, Industrial & Engineering Chemistry Research, 50(11), 2011, 6906–6914.

[15] Zhao, Y., Chen, G., Yuan, Q., Liquid-liquid two-phase flow patterns in a rectangular microchannel, AIChE Journal, 52, 2006, 4052–4060.

[16] Wu, Z., Cao, Z., Sundén, B., Liquid-liquid flow patterns and plug hydrodynamics in square microchannels of cross-shaped junctions, Chemical Engineering Science, 174, 2017, 56–66.

[17] Kashid, M., Kiwi-Minsker, L., Quantitative prediction of flow patterns in liquid-liquid flow in micro-capillaries, Chemical Engineering and Processing: Process Intensification, 50(10), 2011, 972–978.

[18] Waelchli, S., Rudolf von Rohr, P., Two-phase flow characteristics in gas-liquid microreactors, International Journal of Multiphase Flow, 32, 2006, 791–806.

[19] Yagodnitsyna, A.A., Kovalev, A.V., Bilsky, A.V., Flow patterns of immiscible liquid-liquid flow in a rectangular microchannel with T-junction, Chemical Engineering Journal, 303, 2016, 547–554.

[20] Yagodnitsyna, A.A., Kovalev, A.V., Bilsky, A.V., Experimental study of ionic liquid-water flow in T-shaped microchannels with different aspect ratios, Journal of Physics: Conference Series, 899(032026), 2017, 1-6.

[21] Minakov, A.V., Shebeleva, A.A., Yagodnitsyna, A.A., Kovalev, A.V., Bilsky, A.V., Flow regimes of viscous immiscible liquids in T‐type microchannels, Chemical Engineering Technology, 42, 2019, 1037–1044.

[22] Darekar, M., Singh, K.K., Mukhopadhyay, S., Shenoy, K.T., Liquid-liquid two-phase flow patterns in Y-junction microchannels, Industrial & Engineering Chemistry Research, 56(42), 2017, 12215–12226.

[23] Cox, R.G., The dynamics of the spreading of liquids on a solid surface. Part 1. Viscous flow, Journal of Fluid Mechanics, 168, 1986, 169–194.

[24] Kistler SF. Hydrodynamics of wetting, Marcel Dekker, New York, 1993.

[25] Shikhmurzaev, Y.D., Moving contact lines in liquid/liquid/solid systems, Journal of Fluid Mechanics, 334, 1997, 211–249.

[26] Lifton, V.A., Microfluidics: An enabling screening technology for enhanced oil recovery (EOR), Lab on a Chip, 16, 2016, 1777–1796.

[27] Buchgraber, M., Clemens, T., Castanier, L.M., Kovscek, A.R., A microvisual study of the displacement of viscous oil by polymer solutions, SPE Reservoir Evaluation and Engineering, 14(03), 2011, 269–280.

[28] Rangel-German, E.R., Kovscek, A.R., A micromodel investigation of two-phase matrix-fracture transfer mechanisms, Water Resources Research, 42(W03401), 2006, 1-13.

[29] Sinton, D., Energy: The microfluidic frontier, Lab on a Chip, 14, 2014, 3127–3134.

[30] Wang, L., Yang, S., Peng, X., Deng, H., Meng, Z., Qian, K., Wang, Z., Lei, H., An improved visual investigation on gas–water flow characteristics and trapped gas formation mechanism of fracture–cavity carbonate gas reservoir, Journal of Natural Gas Science and Engineering, 49, 2018, 213–226.

[31] Yun, W., Ross, C.M., Roman, S., Kovscek, A.R., Creation of a dual-porosity and dual-depth micromodel for the study of multiphase flow in complex porous media, Lab on a Chip, 17, 2017, 1462–1474.

[32] Minakov, A.V., Pryazhnikov, M.I., Suleymana, Y.N., Meshkova, V.D., An experimental study of the effect of the addition of silicon oxide nanoparticles on the wettability characteristics of rocks with respect to oil, Technical Physics Letter, 46(12), 2020, 1238–1240.

[33] Minakov, A.V., Pryazhnikov, M.I., Suleymana, Y.N., Meshkova, V.D., Guzei, D.V., Experimental study of nanoparticle size and material effect on the oil wettability characteristics of various rock types, Journal of Molecular Liquids, 327, 2021, 114906.

[34] Minakov, A.V., Rudyak, V.Y., Pryazhnikov, M.I., Systematic experimental study of the viscosity of nanofluids, Heat Transfer Engineering, 42(12), 2021, 1024-1040.

[35] Behroodi, E., Latifi, H., Bagheri, Z., Ermis, E., Roshani, S., Moghaddam, M.S., A combined 3D printing/CNC micro-milling method to fabricate a large-scale microfluidic device with the small size 3D architectures: an application for tumor spheroid production, Scientific Reports, 10(22171), 2020, 1–14.

[36] Matellan, C., del Río Hernández A.E., Cost-effective rapid prototyping and assembly of poly(methyl methacrylate) microfluidic devices, Scientific Reports, 8(6971), 2018, 1–13.

[37] Hirt, C.W., Nichols, B.D., Volume of fluid (VOF) method for the dynamics of free boundaries, Journal of Computational Physics, 39(1), 1981, 201–225.

[38] Brackbill, J.U., Kothe, D.B., Zemach, C., A continuum method for modeling surface tension, Journal of Computational Physics, 100(2), 1992, 335–354.

[39] Minakov, A.V., Numerical algorithm for moving-boundary fluid dynamics problems and its testing, Computational Mathematics and Mathematical Physics, 54(10), 2014, 1560–1570.

[40] Garstecki, P., Fuerstman, M.J., Stone, H.A., Whitesides, G.M., Formation of droplets and bubbles in a microfluidic T-junction - Scaling and mechanism of break-up, Lab on a Chip, 6, 2006, 437–446.

[41] Xu, J.H., Li, S.W., Tan, J., Luo, G.S., Correlations of droplet formation in T-junction microfluidic devices: From squeezing to dripping, Microfluidics and Nanofluidics, 5, 2008, 711–717.

[42] Li, Q., Angeli, P., Experimental and numerical hydrodynamic studies of ionic liquid-aqueous plug flow in small channels, Chemical Engineering Journal, 328, 2017, 717–736.

[43] Cao, Z., Qian, J.Y., Wu, Z., Sunden, B., Water-oil flow in square microchannels with a crossed junction, ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting, Montreal, Quebec, Canada, FEDSM2018-83056, 2018.

[44] Sobieszuk, P., Cygański, P., Pohorecki, R., Bubble lengths in the gas-liquid Taylor flow in microchannels, Chemical Engineering Research and Design, 88, 2010, 263–269.

[45] Fu, T., Ma, Y., Funfschilling, D., Zhu, C., Li, H.Z., Squeezing-to-dripping transition for bubble formation in a microfluidic T-junction, Chemical Engineering Science, 65(12), 2010, 3739–3748.

[46] Minakov, A.V., Rudyak, V.Y., Gavrilov, A.A., Dekterev, A.A., Mixing in a T-shaped micromixer at moderate Reynolds numbers, Thermophysics and Aeromechanics, 19(3), 2012, 385–395.

[47] Lobasov, A.S., Minakov, A.V., Analyzing mixing quality in a T-shaped micromixer for different fluids properties through numerical simulation, Chemical Engineering and Processing: Process Intensification, 124, 2018, 11–23.