آمار
| تعداد نشریات | 30 |
| تعداد شمارهها | 986 |
| تعداد مقالات | 8,589 |
| تعداد مشاهده مقاله | 9,200,070 |
| تعداد دریافت فایل اصل مقاله | 7,375,211 |
Numerical Analysis on the Bond Performance of Different Anchored Joints under Monotonic and Cyclic Pull-push Loading | ||
| Journal of Applied and Computational Mechanics | ||
| دوره 8، شماره 1، فروردین 2022، صفحه 388-404 اصل مقاله (3.89 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22055/jacm.2021.38500.3266 | ||
| نویسندگان | ||
| Rui Micaelo1؛ Marta Verdete2؛ Raquel Almeida2؛ Wan-Yang Gao3؛ Hugo Biscaia* 2 | ||
| 1CERIS, CESUR and Department of Civil Engineering, NOVA School of Science and Technology, Portugal | ||
| 2UNIDEMI, Department of Mechanical and Industrial Engineering, NOVA School of Science and Technology, Largo da Torre, Caparica, 2825-149, Portugal | ||
| 3School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai, 200240, China | ||
| چکیده | ||
| This study aims to mitigate the gap of knowledge on the cyclic bond behaviour of Carbon Fiber Reinforced Polymer (CFRP) bonded onto a steel substrate. The Distinct Element Method was used to model different bonding techniques such as Externally Bonded Reinforcement (for reference purposes); the linear increase of the width of the CFRP composite; the assumption of a mixed adhesive; and using an additional steel plate bonded on the top of the CFRP. Compared with the monotonic loading simulations, the load capacity and ductility of the joints with the lowest overlapped bonded lengths decreased with the number of cycles. However, the strength of the CFRP-to-steel joints was not affected if the overlapping bonded joint had a long length. | ||
| کلیدواژهها | ||
| Bond؛ Cyclic loading؛ Damage؛ Numerical simulations؛ Distinct Element Method | ||
| مراجع | ||
|
[1] da Silva L.F.M., Adams R.D., Techniques to reduce the peel stresses in adhesive joints with composites, International Journal of Adhesion and Adhesives, 27(3), 2007, 227-235.
[2] Banea M.D., da Silva L.F.M., The effect of temperature on the mechanical properties of adhesives for the automotive industry, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 224(2), 2010, 51-62.
[3] da Silva L.F.M., Design rules and methods to improve joint strength. Handbook of Adhesion Technology. Springer, Berlin, Heidelberg, 2011.
[4] Wu X.F., Zhao Y., Stress-function variational method for interfacial stress analysis of adhesively bonded joints, International Journal of Solids and Structures, 50(25-26), 2013, 4305-4319.
[5] Banea M.D., da Silva L.F.M., Adhesively bonded joints in composite materials: An overview, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 223(1), 2016, 1-18.
[6] SatyanarayanaGupta M., Veeranjaneyulu K., Fabrication and analysis of adhesive joints used in aircraft structures, Materials Today: Proceedings, 4, 2017, 8279-8286.
[7] Ayatollahi M.R., Samari M., Razavi S.M.J., da Silva L.F.M., Fatigue performance of adhesively bonded single lap joints with non-flat sinusoid interfaces, Fatigue Fracture Engineering Materials Structures, 40(9), 2017, 1355-1363.
[8] Jeevi G., Nayak S.K., Kader M.A., Review on adhesive joints and their application in hybrid composite structures, Journal of Adhesion Science and Technology, 33(14), 2019, 1497-1520.
[9] Lee D.W., Song J.I., Research on simple joint method using fiber-metal laminate design for improved mechanical properties of CFRP assembly structure, Composites Part B: Engineering, 164, 2019, 358-367.
[10] Yuan H., Teng J.G., Seracino R., Wu Z.S., Yao J., Full-range behavior of FRP-to-concrete bonded joints, Engineering Structures, 26(5), 2004, 553-565.
[11] Liu M., Dawood M., A closed-form solution of the interfacial stresses and strains in steel beams strengthened with externally bonded plates using ductile adhesives, Engineering Structures, 154, 2018, 66-77.
[12] Li Q., Fu M., Xie B., Analyzing the bond behavior of Fiber-Reinforced Polymer (FRP) bars embedded in Engineered Cementitious Composites (ECCs) with the nonlocal continuum rod model, Mathematical Problems in Engineering, 2020, 2020, 1710364.
[13] Martinelli E., Closed-form solution procedure for simulating debonding in FRP strips glued to a generic substrate material, Fibers, 9(4), 2021, 22.
[14] Pan J., Xu Z., Leung C.K.Y., Li Z., Analytical and numerical modelling of FRP debonding from concrete substrate under pure shearing, Journal of Wuhan University of Technology, 27, 2012, 142-148.
[15] Campilho R.D.S.G., Banea M.D., Neto J.A.B.P., da Silva L.F.M., Modelling adhesive joints with cohesive zone models: effect of the cohesive law shape of the adhesive layer, International Journal of Adhesion and Adhesives, 44, 2013, 48-56.
[16] Lin J.P., Wu Y.F., Numerical analysis of interfacial bond behavior of externally bonded FRP-to-concrete joints, Journal of Composites for Construction, 20(5), 2016, 04016028.
[17] Bocciarelli M., A new cohesive law for the simulation of crack propagation under cyclic loading. Application to steel- and concrete-FRP bonded interface, Theoretical and Applied Fracture Mechanics, 114, 2021, 102992.
[18] Zhang H., Zhang L., Liu Z., Qi S., Zhu Y., Zhu P., Numerical analysis of hybrid (bonded/bolted) FRP composite joints: A review, Composite Structures, 262, 2021, 113606.
[19] Nakaba K., Kanakubo T., Furuta T., Yoshizawa H., Bond behavior between fiber-reinforced polymer laminates and concrete, ACI Structural, 98(3), 2001, 359-367.
[20] Yuan H., Teng J.G., Seracino R., Wu Z.S., Yao J., Full-range behaviour of FRP-to-concrete bonded joints, Engineering Structures, 26, 2004, 553-565.
[21] Mazzotti C., Savoia M., Ferracuti B., An experimental study on delamination of FRP plates bonded to concrete, Construction and Building Materials, 22(7), 2008, 1409-1421.
[22] Cornetti P., Carpinteri A., Modelling the FRP-concrete delamination by means of an exponential softening law, Engineering Structures, 33(6), 2011, 1988-2001.
[23] Carrara P., Ferretti D., Freddi F., Rosati G., Shear tests of carbon fiber plates bonded to concrete with control of snap-back, Engineering Fracture Mechanics, 78, 2011, 2663-2678
[24] Biscaia H.C., Chastre C., Viegas A., A new discrete method to model FRP to-parent material bonded joints, Composite Structures, 121, 2015, 280-295.
[25] Klamer E.L., Influence of temperature on concrete beams strengthened in flexure with CFRP, Ph.D. Thesis, Eindhoven University, Netherland, 2009.
[26] Leone M., Matthys S., Aiello M.A., Effect of elevated service temperature on bond between FRP systems and concrete, Composites: Part B, 40, 2009, 85 93.
[27] Dai J.G., Gao W.Y., Teng J.G., Bond-slip model for FRP laminates externally bonded to concrete at elevated temperature, Journal of Composites for Construction, 17(2), 2013, 217 228.
[28] Biscaia H., Chastre C., Viegas A., Franco N., Numerical modelling of the effects of elevated service temperatures on the debonding process of FRP-to-concrete bonded joints, Composites Part B: Engineering, 70, 2015, 64-79.
[29] Biscaia H., Ribeiro P., A temperature-dependent bond-slip model for CFRP-to-steel joints, Composite Structures, 217, 2019, 186-205.
[30] Silva M.A.G., Biscaia H., Chastre C., Influence of temperature cycles on bond between GFRP and concrete, ACI Structural Journal, 110(6), 2013, 977-987.
[31] Shrestha J., Ueda T., Zhang D., Durability of FRP concrete bonds and its constituent properties under the influence of moisture conditions, Journal of Materials in Civil Engineering, 27(2), 2015, A4014009.
[32] Gravina R.J., Aydin H., Visintin P., Extraction and analysis of bond-slip characteristics in deteriorated FRP-to-concrete joints using a mechanics-based approach, Journal of Materials in Civil Engineering, 29(6), 2017, 04017013.
[33] Pan Y., Xian G., Li H., Effects of Freeze-Thaw Cycles on the behavior of the bond between CFRP plates and concrete substrates, Journal of Composites for Construction, 22(3), 2018, 04018011.
[34] Liang H., Li S., Lu Y., Yang T., Reliability analysis of bond behaviour of CFRP-concrete interface under wet-dry cycles, Materials (Basel), 11(5), 2018, 741.
[35] Choi K.K., Meshgin P., Taha M.M.R., Shear creep of epoxy at the concrete-FRP interfaces, Composites Part B: Engineering, 38(5-6), 2007, 772-780.
[36] Mazzotti C., Savoia M., Stress redistribution along the interface between concrete and FRP subject to long-term loading, Advances in Structural Engineering, 12, 2009, 5.
[37] Biscaia H., Chastre C., A simple analytical approach for creep analysis of EB-FRP systems, Key Engineering Materials, 774, 2018, 42-47.
[38] Ko H., Sato Y., Bond stress-slip relationship between FRP sheet and concrete under cyclic load, Journal of Composites for Construction, 11(4), 2007, 419-426.
[39] Mazzotti C., Savoia M., FRP-concrete bond behaviour under cyclic debonding force, Advances in Structural Engineering, 12, 2009, 6.
[40] Carloni C., Subramaniam K.V., Savoia M., Mazzotti C., Experimental determination of FRP-concrete cohesive interface properties under fatigue loading, Composite Structures, 94, 2012, 1288-1296.
[41] Carloni C., Subramaniam K.V., Investigation of sub-critical fatigue crack growth in FRP/concrete cohesive interface using digital image analysis, Composites Part B: Engineering, 51, 2013, 35-43.
[42] Martinelli E., Caggiano A., A unified theoretical model for the monotonic and cyclic response of FRP strips glued to concrete, Polymers, 6, 2014, 370-381.
[43] Carrara P., De Lorenzis L., A coupled damage-plasticity model for the cyclic behavior of shear-loaded interfaces, Journal of the Mechanics and Physics of Solids, 85, 2015, 33-53.
[44] Zhou H., Fernando F., Chen G., Kitipornchai, S., The quasi-static cyclic behaviour of CFRP-to-concrete bonded joints: An experimental study and a damage plasticity model, Engineering Structures, 153, 2017, 43-56.
[45] Biscaia H.C., Chastre C., Borba I.S., Silva C., Cruz D., Experimental evaluation of bonding between CFRP laminates and different structural materials, Journal of Composites for Construction, 20(3), 2016, 04015070.
[46] Fernando D., Yu T., Teng J.G., Behavior of CFRP laminates bonded to a steel substrate using a ductile adhesive, Journal of Composites for Construction, 18(2), 2013, 04013040.
[47] He J., Xian G., Debonding of CFRP-to-steel joints with CFRP delamination, Composite Structures, 153, 2016, 12-20.
[48] Biscaia H., Chastre C., Silva M.A.G., Bond-slip model for FRP-to-concrete bonded joints under external compression. Composites Part B: Engineering, 80, 2015, 246-259.
[49] Yang Y., Silva M.A.G., Biscaia H., Chastre, C. CFRP-to-steel bonded joints subjected to cyclic loading: An experimental study, Composites Part B: Engineering, 146, 2018, 28-41.
[50] Dai J., Ueda T., Sato Y., Development of the nonlinear bond stress-slip model of fiber reinforced plastics sheet-concrete interfaces with a simple method, Journal of Composites for Construction, 9(1), 2005, 52-62.
[51] Liu K., Wu Y.F., Analytical identification of bond-slip relationship of EB-FRP joints, Composites Part B: Engineering, 43(4), 2012, 1955-1963.
[52] Obaidat Y.T., Heyden S., Dahlblom, O., Evaluation of parameters of bond action between FRP and concrete, Journal of Composites for Construction, 17(5), 2013, 626-635.
[53] Yang Y., Biscaia H., Chastre C., Silva, M.A.G., Bond characteristics of CFRP-to-steel joints, Journal of Constructional Steel Research, 138, 2017, 401-419.
[54] Kałuza M., Hulimka J., Methacrylate adhesives to create CFRP laminate-steel joints: Preliminary static and fatigue tests, Procedia Engineering, 172, 2017, 489-496.
[55] Biscaia H., Chastre, C., Design method and verification of steel plate anchorages for FRP-to-concrete bonded interfaces, Composite Structures, 192, 2018, 52-66.
[56] Wang H.T., Wu G., Dai Y.T., He X.Y., Experimental study on bond behavior between CFRP plates and steel substrates using digital image correlation, Journal of Composites for Construction, 20(6), 2016, 04016054.
[57] Biscaia H., Chastre C., Theoretical analysis of fracture in double overlap bonded joints with FRP composites and thin steel plates, Engineering Fracture Mechanics, 190, 2018, 435-460.
[58] Biscaia H.C., Micaelo R., Teixeira J., Chastre C., Numerical analysis of FRP anchorage zones with variable width, Composites Part B: Engineering, 67, 2014, 410-426.
[59] Potyondy D.O., Cundall P.A., A bonded-particle model for rock, International Journal of Rock Mechanics and Mining Sciences, 41(8), 2004, 1329-1364.
[60] Azevedo N.M., Lemos J.V., Almeida J.R., A discrete particle model for reinforced concrete fracture analysis, Structural Engineering and Mechanics: An International Journal, 36(3), 2010, 343-361.
[61] Azevedo N.M., Lemos J.V., A 3D generalized rigid particle contact model for rock fracture, Engineering Computations, 30(2), 2013, 277-300.
[62] Biscaia H., Micaelo R., Teixeira J., Chastre C., Delamination process analysis of FRP-to-parent material bonded joints with and without anchorage systems using the Distinct Element Method, Composite Structures, 116, 2014, 104-119.
[63] Biscaia H., Micaelo R., Chastre C., Cyclic performance of adhesively bonded joints using the Distinct Element Method: Damage and parametric analysis, Composites Part B: Engineering, 178, 2019, 107468.
[64] Rodrigues H., Varum H., Arêde A., Costa A., A comparative analysis of energy dissipation and equivalent viscous damping of RC columns subjected to uniaxial and biaxial loading, Engineering Structures, 35, 2012, 149-164.
[65] Chopra A.K. Dynamics of structures: Theory and applications to earthquake engineering (Subsection 3.9: Equivalent viscous damping), Prentice‑Hall Inc., Upper Saddle River, NJ, USA, 2001. | ||
|
آمار تعداد مشاهده مقاله: 587 تعداد دریافت فایل اصل مقاله: 455 |
||