تعداد نشریات | 31 |
تعداد شمارهها | 1,003 |
تعداد مقالات | 8,914 |
تعداد مشاهده مقاله | 9,672,408 |
تعداد دریافت فایل اصل مقاله | 7,963,982 |
Computational Enhancement of a Mixed 3D Beam Finite Element with Warping and Damage | ||
Journal of Applied and Computational Mechanics | ||
مقاله 20، دوره 8، شماره 1، فروردین 2022، صفحه 260-281 اصل مقاله (9.56 M) | ||
نوع مقاله: Research Paper | ||
شناسه دیجیتال (DOI): 10.22055/jacm.2021.37948.3120 | ||
نویسندگان | ||
Paolo Di Re؛ Daniela Addessi* | ||
Department of Structural and Geotechnical Engineering, Sapienza University of Rome, Via Eudossiana 18, Rome, 00184, Italy | ||
چکیده | ||
This paper describes the computational aspects of the beam Finite Element formulation recently developed by the authors to simulate the nonlinear response of structural members subjected to shear and torsion, accounting for cross-section warping. The paper focuses on an efficient consistent solution algorithm that by-passes the iterative procedure required in force-based and mixed Finite Elements and makes the model easy to be implemented in a standard code. Moreover, it proposes a new non-iterative technique to condense out the stress components derived by the three-dimensional constitutive response and not directly included in the fiber section formulation. The efficiency and accuracy of the proposed numerical model are validated by simulating the response of steel and reinforced concrete structural members. | ||
کلیدواژهها | ||
Mixed Finite Element؛ Enhanced beam formulation؛ Warping؛ Nonlinear analysis؛ Damage | ||
مراجع | ||
[1] Rabczuk, T., Zi, G., Bordas, S., Nguyen-Xuan, H., A geometrically non-linear three-dimensional cohesive crack method for reinforced concrete structures. Engineering Fracture Mechanics, 75(16), 2008, 4740-4758.
[2] Areias, P., Rabczuk, T., Finite strain fracture of plates and shells with configurational forces and edge rotations. International Journal for Numerical Methods in Engineering, 94(12), 2013, 1099-1122.
[3] Ciampi, V., Carlesimo, L., A nonlinear beam element for seismic analysis of structures. 8th European Conference on Earthquake Engineering, 1986.
[4] Ayoub, A., Filippou, F. C., Mixed formulation of nonlinear steel-concrete composite beam element. Journal of Structural Engineering-ASCE, 126(3), 2000, 371-381.
[5] Taylor, R. L., Filippou, F. C., Saritas, A., Auricchio, F., A mixed finite element method for beam and frame problems. Computational Mechanics, 31(1), 2003, 192-203.
[6] Alemdar, B. N., White, D. W., Displacement, flexibility, and mixed beam-column finite element formulations for distributed plasticity analysis. Journal of Structural Engineering-ASCE, 131(12), 2005, 1811-1819.
[7] Bairán García, J.M., A non-linear coupled model for the analysis of reinforced concrete sections under bending, shear, torsion and axial forces. Ph.D. Thesis, Universitat Politècnica de Catalunya, 2005.
[8] Ceresa, P., Petrini, L., Pinho, R., Flexure-shear fiber beam-column elements for modeling frame structures under seismic loading - State of the art. Journal of Earthquake Engineering, 11(S1), 2007, 46-88.
[9] Bairan, J.M., Mari, A.R., Multiaxial-coupled analysis of RC cross-sections subjected to combined forces. Engineering Structures, 29(8), 2007, 1722-1738.
[10] Mohr, S., Bairán, J.M., Marí, A.R., A frame element model for the analysis of reinforced concrete structures under shear and bending. Engineering Structures, 32(12), 2010, 3936-3954.
[11] Poliotti, M., Bairán, J.M., B-spline sectional model for general 3D effects in reinforced concrete elements. Engineering Structures, 207, 2020, 110200.
[12] Kagermanov, A., Ceresa, P., 3D fiber-based frame element with multiaxial stress interaction for RC structures. Advances in Civil Engineering, 2018, 1-13.
[13] Saritas, A., Filippou, F.C., Inelastic axial-flexure–shear coupling in a mixed formulation beam finite element. International Journal of Non-Linear Mechanics, 44(8), 2009, 913-922.
[14] Ferradi, M.K., Cespedes, X., A new beam element with transversal and warping eigenmodes. Computers & Structures, 131, 2014, 12-33.
[15] Vieira, R.F., Virtuoso, F.B.E., Pereira, E.B.R., A higher order thin-walled beam model including warping and shear modes. International Journal of Mechanical Sciences, 66, 2013, 67-82.
[16] Dikaros, I.C., Sapountzakis, E.J., Generalized warping analysis of composite beams of an arbitrary cross section by BEM. I: Theoretical considerations and numerical implementation. Journal of Engineering Mechanics, 140(9), 2014, 04014062.
[17] Capdevielle, S., Grange, S., Dufour, F., Desprez, C., A multifiber beam model coupling torsional warping and damage for reinforced concrete structures. European Journal of Environmental and Civil Engineering, 20(8), 2016, 914-935.
[18] Genoese, A., Genoese, A., Bilotta, A., Garcea, G., A geometrically exact beam model with non-uniform warping coherently derived from the Saint Venant rod. Engineering Structures, 68, 2014, 33-46.
[19] Le Corvec, V., Nonlinear 3d frame element with multi-axial coupling under consideration of local effects. Ph.D. Thesis, University of California, Berkeley, USA, 2012.
[20] Di Re, P., Addessi, D., Filippou, F.C., 3d beam-column finite element under non-uniform shear stress distribution due to shear and torsion. ECCOMAS Congress 2016, VII European Congress on Computational Methods in Applied Sciences and Engineering, 2016.
[21] Di Re, P., Addessi, D., Filippou, F.C., Mixed 3D beam element with damage plasticity for the analysis of RC members under warping torsion. Journal of Structural Engineering - ASCE, 144(6), 2018, 04018064.
[22] Di Re, P., Addessi, D., A mixed 3D corotational beam with cross-section warping for the analysis of damaging structures under large displacements. Meccanica, 53(6), 2018, 1313-1332.
[23] Di Re, P., Addessi, D., Paolone, A., Mixed beam formulation with cross-section warping for dynamic analysis of thin-walled structures. Thin-Walled Structures, 141, 2019, 554-575.
[24] Gruttmann, F., Sauer, R., Wagner, W., Shear stresses in prismatic beams with arbitrary cross‐sections. International Journal for Numerical Methods in Engineering, 45(7), 1999, 865-889.
[25] Lee, S.W., Kim, Y.H., A new approach to the finite element modelling of beams with warping effect. International Journal for Numerical Methods in Engineering, 24(12), 1987, 2327-2341.
[26] Yoon, K., Lee, P.S., Kim, D.N., An efficient warping model for elastoplastic torsional analysis of composite beams. Composite Structures, 178, 2017, 37-49.
[27] Khoder, N., Grange, S., Sieffert, Y., Enhancement of a two-dimensional multifibre beam element in the case of reinforced concrete structures for taking into account the lateral confinement of concrete due to stirrups. European Journal of Environmental and Civil Engineering, 23(5), 2019, 564-585.
[28] Lee, C.L., Filippou, F.C., Frame elements with mixed formulation for singular section response. International Journal for Numerical Methods in Engineering, 78(11), 2009, 1320-1344.
[29] Neuenhofer, A., Filippou, F.C., Evaluation of nonlinear frame finite-element models. Journal of Structural Engineering - ASCE, 123(7), 1997, 958-966.
[30] Saritas, A., Soydas, O., Variational base and solution strategies for non-linear force-based beam finite elements. International Journal of Non-linear Mechanics, 47(3), 2012, 54-64.
[31] Simo, J.C., Hughes, T.J.R., Computational inelasticity. Springer Science & Business Media, 2006.
[32] Klinkel, S., Govindjee, S., Using finite strain 3D‐material models in beam and shell elements. Engineering Computations, 2002.
[33] Zienkiewicz, O.C., Taylor, R.L., The finite element method for solid and structural mechanics. Elsevier, 2005.
[34] Soydas, O., Saritas, A., An accurate nonlinear 3d Timoshenko beam element based on Hu-Washizu functional. International Journal of Mechanical Sciences, 74, 2013, 1-14.
[35] Spacone, E., Filippou, F.C., Taucer, F.F., Fibre beam–column model for non‐linear analysis of R/C frames: Part I. Formulation. Earthquake Engineering & Structural Dynamics, 25(7), 1996, 711-725.
[36] Kostic, S.M., Filippou, F.C., Section discretization of fiber beam-column elements for cyclic inelastic response. Journal of Structural Engineering - ASCE, 138(5), 2012, 592-601.
[37] Vlasov, V.Z., Thin-Walled Elastic Beams, National Technical Information Service, 1984.
[38] El Fatmi, R., Non-uniform warping including the effects of torsion and shear forces. Part I: A general beam theory, International Journal of Solids and Structures, 44(18–19), 2007, 5912–5929.
[39] Menegotto, M., Method of analysis for cyclically loaded RC plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending. IABSE symposium on resistance and ultimate deformability of structures acted on by well defined repeated loads, 1973, 15-22.
[40] Addessi, D., Marfia, S. Sacco, E., A plastic nonlocal damage model. Computer Methods in Applied Mechanics and Engineering, 191(13-14), 2002, 1291-1310.
[41] Drucker, D.C., Prager, W., Soil mechanics and plastic analysis or limit design. Quarterly of Applied Mathematics. 10(2), 1952, 157-65
[42] Gatta, C., Addessi, D., Vestroni, F., Static and dynamic nonlinear response of masonry walls. International Journal of Solids and Structures, 155, 2018, 291-303.
[43] Rezaiee-Pajand, M., Sharifian, M., Sharifian, M., Accurate and approximate integrations of Drucker–Prager plasticity with linear isotropic and kinematic hardening. European Journal of Mechanics-A/Solids, 30(3), 2011, 345-361.
[44] Öztekin, E., Pul, S., Hüsem, M., Experimental determination of Drucker-Prager yield criterion parameters for normal and high strength concretes under triaxial compression. Construction and Building Materials, 112, 2016, 725-732.
[45] Strang, G., Linear algebra and its application. Thomson, Brooks Cole, 2006.
[46] Neuenhofer, A., Filippou, F.C., Evaluation of nonlinear frame finite-element models. Journal of structural engineering, 123(7), 1997, 958-966.
[47] Addessi, D., Ciampi, V., A regularized force‐based beam element with a damage–plastic section constitutive law. International Journal for Numerical Methods in Engineering, 70(5), 2007, 610-629.
[48] Mazars, J., Kotronis, P., Ragueneau, F., Casaux, G., Using multifiber beams to account for shear and torsion: Applications to concrete structural elements. Computer Methods in Applied Mechanics and Engineering, 195(52), 2006, 7264-7281.
[49] Pegon, P., Plumier, C., Pinto, A., Molina, J., Gonzalez, P., Tognoli, P., U-shaped walls: quasi-static bi-axial test in the X and Y directions - Test report. Technical report, TMR-ICONSTOPIC5, Test report, JRC, Ispra, Italy, 2000
[50] Beyer, K., Dazio, A., Priestley, M.J.N., Quasi-static cyclic tests of two U-shaped reinforced concrete walls. Journal of Earthquake Engineering, 12(7), 2008, 1023-1053.
[51] Bathe, K.J., Dvorkin, E.N., A four‐node plate bending element based on Mindlin/Reissner plate theory and a mixed interpolation. International Journal for Numerical Methods in Engineering, 21(2), 1985, 367-383.
[52] Chalioris, C.E., Torsional strengthening of rectangular and flanged beams using carbon fibre-reinforced-polymers–Experimental study. Construction and Building Materials, 22(1), 2008, 21-29.
[53] Basaglia, C., Camotim, D., Silvestre, N., Torsion warping transmission at thin-walled frame joints: Kinematics, modelling and structural response. Journal of Constructional Steel Research, 69(1), 2012, 39-53.
[54] Genoese, A., Genoese, A., Bilotta, A., Garcea, G., A mixed beam model with non-uniform warpings derived from the Saint Venànt rod. Computers & Structures, 121, 2013, 87-98.
[55] Addessi, D., Di Re, P., Cimarello, G., Enriched beam finite element models with torsion and shear warping for the analysis of thin-walled structures. Thin-Walled Structures, 159, 2021, 107259.
[56] Taylor, R.L., FEAP-finite element analysis program, 2014. URL: http://www.ce.berkeley/feap. | ||
آمار تعداد مشاهده مقاله: 641 تعداد دریافت فایل اصل مقاله: 481 |