تعداد نشریات | 31 |
تعداد شمارهها | 1,003 |
تعداد مقالات | 8,914 |
تعداد مشاهده مقاله | 9,672,421 |
تعداد دریافت فایل اصل مقاله | 7,963,989 |
Thermal Analysis of Radiating Film Flow of Sodium Alginate using MWCNT Nanoparticles | ||
Journal of Applied and Computational Mechanics | ||
مقاله 17، دوره 8، شماره 1، فروردین 2022، صفحه 219-231 اصل مقاله (459.4 K) | ||
نوع مقاله: Research Paper | ||
شناسه دیجیتال (DOI): 10.22055/jacm.2020.33386.2218 | ||
نویسندگان | ||
Akinbowale T. Akinshilo* 1؛ Amin Davodi2؛ Adeleke Ilegbusi3؛ Gbeminiyi Sobamowo1 | ||
1Department of Mechanical Engineering, University of Lagos, Akoka-Yaba, Nigeria | ||
2Department of Civil and Mechanical Engineering, Babol University of Technology, Babol, Iran | ||
3Department of Mechanical Engineering, Yaba College of Technology, Yaba, Nigeria | ||
چکیده | ||
Heat transfer of fluids plays an important role in process flows, as this has significant impacts in process configurations, energy pricing and utilization. Therefore, this paper, the heat and mass transfer of a radiating non-Newtonian Sodium alginate transported through parallel squeezing plates is examined. The radiating-squeezing fluid flows through the parallel plates arranged vertically against each other with multi walled carbon nanotube (MWCNT) particles. Transport mechanics and thermal conditions of the Sodium alginate is studied using systems of coupled nonlinear models. This higher order, governing ordinary differential models are used to analyze the thermal and mass transfer of the nanofluid using the adomian decomposition method. Results obtained from analytical study displayed graphically are used to investigate effect of thermal radiation on film flow of MWCNT nanoparticles on the Sodium alginate. As revealed from result, concentration increase of MWCNT nanoparticles increases thermal profile significantly. This can be physically explained owing to increasing concentration, increases thickness of thermal boundary due to conductivity enhancement of fluid. Improved thermal diffusivity drops thermal gradient which reduces heat transfer. Whereas, radiation effect on fluid transport shows decrease in heat transfer as thermal conductivity becomes lower than temperature gradient of the flow. Obtained analysis when compared against other methods of solution (numerical and approximate analytical) proves satisfactory. Therefore, the results obtained from the work provides a good basis for the application and improvement of the Sodium alginate in medical, pharmaceutical and manufacturing industries among other practical application. | ||
کلیدواژهها | ||
Sodium Alginate؛ MWCNT particles؛ heat transfer؛ fluid transport؛ Adomian Decomposition Method | ||
مراجع | ||
[1] Hosseinzadeh, Kh., Alizadeh, M., Ganji, D.D., Hydrothermal analysis on MHD squeezing nanofluid flow in parallel plates by analytical method, International Journal of Mechanical and Materials Engineering, 143, 2020, 39-52.
[2] Ziabakhsh, Z., Domairry, G., Analytic solution of natural convection flow of a non-Newtonian fluid between two vertical flat plates using homotopy analysis method, Communication Nonlinear Science and Numerical Simulation, 14, 2009, 1868-1880.
[3] Mustafa, M., Hayat, T., Obadiat, S., On heat and mass transfer in an unsteady squeezing flow between parallel plates, Mechanica, 47, 2012, 1581-1589.
[4] Jaiyesimi, L.O., Sobamowo, M.G., Akinshilo, A.T., Waheed, M.A., Chebychev spectral collocation method to micropolar fluid flow through a porous channel driven with high mass transfer, World Scientific News; an International Journal, 143, 2020, 39-52.
[5] Adesanya, S.O., Falade, J.A., Thermodynamic analysis of hydro magnetic third grade fluid flow through a channel filled with porous medium, Alexandria Engineering Journal, 14, 2015, 615-622.
[6] Hoshyar, H.A., Ganji, D.D., Borranc, A.R., Falahatid, M., Flow behavior of unsteady incompressible Newtonian fluid flow between two parallel plates via homotopy analysis method, Latin American Journal of Solids and structures, 12, 2015, 1859-1869.
[7] Ijaz, N., Zeeshan, A., Bhatti, M.M., Ellahi, R., Analytical study on liquid solid particles interaction in the presence of heat and mass transfer through a wavy channel, Journal of Molecular Liquids, 250, 2018, 80-87.
[8] Kargar, A., Akbarzade, M., Analytical solution of Natural convection Flow of a non-Newtonian between two vertical parallel plates using the Homotopy Perturbation Method, World Applied Sciences Journal, 20, 2012, 1459-1465.
[9] Turkyilmazoglu,M., Condensation of lamina film flow over a curved vertical wall using single- and two-phase nano fluid models, European Journal of Mechanics-B/Fluids, 65, 2017, 184-191.
[10] Hatami, M. Ganji, D.D., Natural convection of sodium alginate (SA) non-Newtonian nanofluid flow between two vertical flat plates by analytical and numerical methods, Thermal Engineering, 2, 2014, 14-22.
[11] Hatami, M., Hatami, J., Jafayar, M., Domairry, G., Differential transformation method for Newtonian and non-Newtonian fluid analysis: Comparison with HPM and numerical solution, Journal of Brazilian Society of Mechanical Science and Engineering, 38, 2016, 589-599.
[12] Ahmadi, A.R., Zahmatkesh, A., Hatami, M., Ganji, D.D., Comprehensive analysis of the flow and heat transfer for nanofluid over an unsteady stretching flat plate, Powder Technology, 258, 2014, 125-133.
[13] Ghadhikolaei, S.S., Hosseinzadeh, K, Ganji, D.D., Analysis of unsteady MHD Eyring Powel squeezing flow in stretching channel with considering thermal radiation and joule heating effect using AGM, Case Studies in Thermal Engineering, 10, 2017, 579-594.
[14] Sheikholeslami, M., Rashidi, M.M., Alsaad, D.M., Rokni, H.B., Steady nanofluid flow between parallel plates considering thermophoresis and Brownian effects, Journal of King Saud University Science, 28(4), 2016, 380-389.
[15] Pourmehran, O., Rahimi-Gorji, M., Gorji-Bandpy, M., Ganji, D.D., Analytical investigation of squeezing unsteady nanofluid flow between parallel plates by LSM and CM, Alexandria Engineering Journal, 54, 2015, 17-26.
[16] Ghadikholaei, S.S., Hosseinzadeh, K., Yassari,M., Sadeghi, H., Ganji, D.D., Boundary layer analysis of micropolar dusting fluid with TiO2 nanoparticles in a porous medium under the effect magnetic field and thermal radiation over a stretching sheet, Journal of Molecular Liquids, 244, 2017, 374-389.
[17] Ghadikholaei, S.S., Yassari, M., Sadeghi, H.,Hosseinzadeh, K, Ganji, D.D., Investigation on thermophysical properties of TiO2-Cu /H2O hybrid nanofluid transport dependent on shape factor in MHD stagnation point flow, Powder Technology, 322, 2017, 428-438.
[18] Domairry, G., Hatami, M., Squeezing Cu-water nanofluid flow analysis between parallel plates by DTM-Pade Method, Journal of Molecular Liquids, 188, 2014, 155-161.
[19] Afify, A.A., Abdel-Azizi, M., Lie group analysis of flow and heat transfer of non-Newtonian nanofluid, Pramana Journal of Physics, 31, 2017, 88-104.
[20] Sheikholeslami, M., Abelman, S., Two phase simulation of nanofluid flow and heat transfer in an annulus in the presence of an axial magnetic field, IEEE Transaction on Nanotechnology, 14, 2015, 561-566.
[21] Madaki, A.G., Roslan, R., Mohamed, M., Kamardan, M.G., Analytical solutions of squeezing unsteady nanofluid flow in the presence of thermal radiation, Journal of Computer Science and Computational Mathematics, 6, 2016, 451-463.
[22] Akinshilo, A.T., Olofinkua, J.O., Olaye, O., Flow and Heat Transfer Analysis of Sodium Alginate Conveying Copper Nanoparticles between Two Parallel Plates, Journal of Applied and Computational Mechanics, 3(4), 2017, 25-266.
[23] Menni, Y., Azzi, A., Chanmkha, A.J., A review of solar energy collector: models and applications, Journal of Applied and Computational Mechanics, 4(4), 2018, 375-401.
[24] Menni, Y., Azzi, Chamkha, A.J., Harmand, S., Analysis of fluid dynamics and heat transfer in a rectangular duct with staggered baffles, Journal of Applied and Computational Mechanics, 5(5), 2019, 231-248.
[25] Menni, Y., Azzi, Chamkha, A.J., The solar air channels: comparative analysis, introduction of arc shaped fins to improve thermal transfer, Journal of Applied and Computational Mechanics, 5(4), 2019, 616-626.
[26] Menni, Y., Chamkha, A.J., Azzi, Y., Fluid flow and heat transfer over staggered “+” shaped obstacles, Journal of Applied and Computational Mechanics, 2018, doi.10.22055/JACM.2018.2677.1316.
[27] Menni, Y., Chamkha, A.J., Ahmadi, M.H., Hydrodynamic behavior in solar oil heat exchanger ducts fitted with staggered baffles and fins, Journal of Applied and Computational Mechanics, 2020, doi.10.22055/JACM.2020.32468.2021.
[28] Chamkha, A.J., Menni, Y., Ameur, H., Thermal aerodynamic performance measurement of air heat transfer fluid mechanics over s-shaped fins in shell and tube heat exchangers, Journal of Applied and Computational Mechanics, 2020, doi.10.22055/JACM.2020.32107.1970.
[29] Sakhri, N., Menni, Y., Chamkha, A.J., Heating capacity of an earth to air heat exchanger in arid regions- experimental investigation, Journal of Applied and Computational Mechanics, 2020, doi.10.22055/JACM.2020.31237.1843.
[30] Kaseian, A., Daneshazarian, R., Mahian, O., Kolsi, A.J., Chamkha, A.J., Wongwises, S., Nanofluid transport in porous media- a review of the latest development, International Journal of Heat and Mass Transfer, 107, 2017, 778-791.
[31] Menni, Y., Chamkha, A.J., Ahmed, A., Nanofluid flow in complex geometries- a review, Journal of Nanofluid, 8(5), 2019, 893-916.
[32] Menni, Y., Chamkha, A.J., Lorenzini, G., Noueddine, K., Ameur, H., Nensafi, M., Advances of nanofluid flow in solar collectors- A review of numerical studies, Mathematical Modelling of Engineering Problem, 060313, 2019, 415-427.
[33] Menni, Y., Chamkha, A.J., Massarotti, N., Ameur, H., Kaid, N., Bensafi, M., Hydrodynamics and thermal analysis of water, ethylene glycol, and water-ethylene glycol as base fluids dispersed by aluminum nano-sized solid particles, International Journal of Numerical Methods for Heat and Fluid Flow, 2019, doi.10.11081/HFF-10-2019-0739.
[34] Menni, Y., Zidani, A.J., Benyoucef, C., Heat and nanofluid transfer through baffled channel in different outlet models, Mathematical Modelling of Engineering Problem, 6(1), 2019, 52-60.
[35] Menni, Y., Chamkha, A.J., Ahmed, A., Numerical analysis of heat transfer and nanofluid mass transfer in a channel with detached and attached baffled plates, Journals of Nanofluids, 8(5), 2019, 83-916.
[36] Choi, S.U.S., Engineering thermal conductivity of fluids with nanoparticles, Development and Application of Non-Newtonian Flows, 66, 1995, 99-105.
[37] Alizadeh, M., Dogonchi, A.S., Ganji, D.D., Micropolar nanofluid flow and heat transfer between penetrable walls by the presence of thermal radiation and magnetic field, Case Studies in Thermal Engineering, 12, 2018, 319-322.
[38] Dogonchi, A.S., Ganji, D.D., Impact of Cattaneo-Christov heat flux on MHD nanofluid flow and heat transfer between parallel plate considering thermal radiation effect, Journal Institution of Chemical Engineers, 80, 2017, 52-63.
[39] Akinshilo, A.T., Investigation of nanofluid conveying porous medium through non-parallel plates using the Akbari Ganji method, Physica Scripta, 2019, http://doi.org/10.1088/1402-4896/ab52f6.
[40] Hayat, T., Nasir, T., Khan, M.I, Alsaedi, A., Non-Darcy flow of water based single (SWCNTS) and multiple (MWCNTS) walls carbon nanotubes with multiple slip condition due to rotating disk, Results in Physics, 9, 2019, 390-399.
[41] Yan, S.R., Kalbasi, R., Nguyen, Q., Karimipour, A., Sensitivity of adhesive and cohesive intermolecular forces to the incorporation of MWCNTs into liquid paraffin: Experimental study and modelling of surface tension, Journal of Molecular Liquids, 310, 2020, 113235.
[42] Tian, Z, Rostamis, S., Taherialekouhi, R., Karimipour, A., Moradikazerouni, A., Yarmand, H., Zulkifli, N.W.B.M., Prediction of rheological behavior of a new hybrid nanofluid consists of copper oxide and multi walled carbon nanotubes suspended in a mixture of water and ethylene glycol using curve fitting on experimental data, Physica A: Statistical Mechanics and Its Applications, 549, 2020, 124101.
[43] Sharifzadeh, B., Kalbasi, R., Jahangiri, M., Toghraie, D., Karimipour, A., Computer modelling of pulsatie blood flow in elastic artery using a software program for application in biomedical engineering, Computer Methods and Programs in Biomedicine, 192, 2020, 105442.
[44] Farzinpour, M., Toghraie, D., Mehmandoust, B., Aghadavoudi, F., Karimipour, A., Molecular dynamics study of barrier effects on ferro-nanofluid flow in the presence of constant and time dependent external magnetic field, Journal of Molecular Liquids, 308, 2020, 113152.
[45] Yan, S.R., Kalbasi, R., Nguyen, Q., Karimpour, A., Rheological behavior of hybrid MWCNTs-TiO2/EG nanofluid: A comprehensive modelling and experimental study, Journal of Molecular Liquids, 306, 2020, 112937.
[46] Yan, S.R., Shirani, A., Zarringhalam, M., Nguyen, Q., Karimipour, A., Prediction of boiling flow characteristics in rough and smooth microchannels using molecular dtnamics simulatin: Investigation the effects of boundary wall temperatures, Journal of Molecular Liquids, 308, 2020, 113058.
[47] Filobello-Niño, U., Vazquez-Leal, H., Boubaker, K., Khan, Y., Perez-Sesma, A., Sarmiento Reyes, A., Jimenez-Fernandez, V.M., Diaz-Sanchez, A. Herrera-May, A., Sanchez-Orea, J., Pereyra-Castro, K., Perturbation Method as a Powerful Tool to Solve Highly Nonlinear Problems: The Case of Gelfand’s Equation, Asian Journal of Mathematics and Statistics, 6, 2013, 76-82.
[48] Bhatti, M.M., Rashidi, M.M., Pop, I., Entropy generation with nonlinear heat and mass transfer on MHD boundary layer over a moving surface using SLM, Nonlinear Engineering, 6, 2017, 43-52.
[49] Akinshilo, A.T., Olaye, O., On the analysis of the Erying Powell model based fluid flow in a pipe with temperature dependent viscosities and internal heat generation, Journal of King Saud-Engineering Sciences, 31, 2019, 271-279.
[50] Hassan, W., Sajjad, H., Humaira, S., Shanila, K., MHD forced convection flow past a moving boundary surface with prescribed heat flux and radiation, British Journal of Mathematics and Computer Science, 21, 2017, 1-14.
[51] Bank, R.N., Dash, G.C., Chemical reaction effect on peristaltic motion of micropolar fluid through a porous medium with heat absorption the presence of magnetic field, Advances in Applied Science Research, 6, 2015, 20-34.
[52] Mekonnen, S.A., Negussie, T.D., Hall effect and temperature distribution on unsteady micropolar fluid flow in a moving wall, International Journal of Science Basic and Applied Research, 24, 2015, 60-75.
[53] Mekheir, K.S., Mohammed, S.M., Interaction of pulsatile flow on peristaltic motion of magneto micropolar fluid through porous medium in a flexible channel: Blood flow model, International Journal Pure and Applied Mathematics, 94, 2014, 323-339.
[54] Pour, M., Nassab, S., Numerical investigation of forced laminar convection flow of nanofluid over a backward facing step under bleeding condition, Journal of Mechanics, 28(2), 2012, 7-12.
[55] Hatami, M., Jing, D., Differential transformation method for Newtonian and non-Newtonian nanofluid flow analysis: compared to numerical solution, Alexander Engineering Journal, 55, 2016, 731-739.
[56] Trkyilmazoglu, M., Mixed convection of magnetohydramic micropolar due to a porous heater / heated deformable plate: exact solution, International Journal Heat Mass Transfer, 2017, 127-134.
[57] Akinshilo, A.T., Flow and heat transfer of nanofluid with injection through an expanding or contracting porous channel under magnetic force field, Engineering Science and Technology, an International Journal, 21, 2018, 486-494.
[58] Chamkha, A.J., Molana, M., Rahnama, A., Ghadami, F., On the nanofluids applications in microchannels: a comprehensive review, Powder Technology, 332(1), 2018, 287-322.
[59] Chamkha, A.J., Solar radiation assisted natural convection in uniform porous medium supported by a vertical flat plate, Journal of Heat Transfer, 11991, 1997, 89-96.
[60] Damseh, R.A., Al-Odat, M.Q., Chamkha, A.J., , Shannak, B.A., Combined effect of heat generation or absorption and first-order chemical reaction on micropolar fluid flows over a uniformly stretched permeable surface: The full analytical solution, International Journal of Thermal Science, 48(8), 2009, 1658-1663.
[61] Chamkha, A.J., Takhari, H.S., Soundalgekar, V.M., Radiation effects on free convection flow past a semi-infinite vertical plate with mass transfer, Chemical Engineering Journal, 8(3), 2001, 335-344.
[62] Umvathi, J.C., Chamkha, A.J., Mateen, A., Al-Mudhaf, A., Unsteady two-fluid flow and heat transfer in a horizontal channel, Heat and Mass Transfer, 42, 2005, 81.
[63] Chamkha, A.J., Rashad, A.M., Mansour, M.A., Armaghani, T., Ghalambaz, M., Effects of heat sink and source and entropy generation on MHD mixed convection of a Cu-water nanofluid in a lid-driven square porous enclosure with partial slip, Physics of Fluid, 29, 2017, 052001.
[64] Rashad, A., Armaghani, T., Chamkha, A.J., Mansour, M.A., Entropy generation and MHD natural convection of a nanofluid in an inclined square porous cavity: effects of a heat sink and source size and location, Chinese Journal of Physics, 56(1), 2018, 193-211.
[65] Parvin, S., Nasrin, R., Alim, A., Hossain, N.K., Chamkha, A.J., Thermal conductivity variation on natural convection flow of water–alumina nanofluid in an annulus, International Journal of Heat and Mass Transfer, 55(19), 2012, 5268-5274.
[66] Chamkha, A.J., Flow of two-immiscible fluids in porous and nonporous channels, Journal of Fluid Engineering, 122(1), 2000, 117-124.
[67] Khanafer, K.M., Chamkha, A.J., Hydromagnetic natural convection from an inclined porous square enclosure with heat generation, An International Journal of Computation and Methodology, 33(8), 199, 81-910.
[68] Chamkha, A., Ismael, M., Kasaeipoor, A., Armaghani, T., Entropy generation and natural convection of CuO-water nanofluid in C-shaped cavity under magnetic field, Entropy, 18, 2016, 50.
[69] Chamkha, A.J., Boostanidezfuli, A., Izadpanahi, E., Ghalambaz, M., Phase-change heat transfer of single/hybrid nanoparticles-enhanced phase-change materials over a heated horizontal cylinder confined in a square cavity, Advanced Powder Technology, 28(2), 2017, 385-397.
[70] Takhar, H.S., Chamkha, A.J., Nath, G., Unsteady three-dimensional MHD-boundary-layer flow due to the impulsive motion of a stretching surface, Acta Mechanica, 146, 2001, 59-71.
[71] Chamkha, A.J., Khalid, A.A., Hydromagnetic Natural Convection from an Isothermal Inclined Surface Adjacent to a Thermally Stratified Porous Medium, International Journal of Numerical Method for Heat and Fluid Flow, 10(5), 2000, 455-477.
[72] Chamkha, A.J., Khaled, A.A., Hydromagnetic combined heat and mass transfer by natural convection from a permeable surface embedded in a fluid-saturated porous medium, International Journal of Numerical Methods For Heat and Fluid Flow, 10(5), 2000, 455-477.
[73] Zakari, A., Ghalambaz, M., Chamkha, A.J., Rossi, D.D., Theoretical analysis of natural convection boundary layer heat and mass transfer of nanofluids: effects of size, shape and type of nanoparticles, type of base fluid and working temperature, Advanced Powder Technology, 26(3), 2015, 935-946.
[74] Chamkha, A.J., Al-Mudhaf, A., Unsteady heat and mass transfer from a rotating vertical cone with a magnetic field and heat generation or absorption effects, International Journal of Thermal Science, 44(3), 2005, 267-276.
[75] Chamkha, A.J., Issa, C., Effect of Heat Generation or Absorption on Thermophoretic Free Convection Boundary Layer From a Vertical Flat Plate Embedded in a Porous Medium, International Journal of Numerical Methods for Heat and Fluid Flow, 10(4), 2000, 432-449.
[76] Ghalambaz, M., Behseresht, A., Behseresht, J., Chamkha, A.J., Effects of nanoparticles diameter and concentration on natural convection of the Al2O3–water nanofluids considering variable thermal conductivity around a vertical cone in porous media, Advanced Powder Technology, 26(1), 2015, 224-235.
[77] Subba, R., Gorla, R., Chamkha, A.J., Natural convective boundary layer flow over a nonisothermal vertical plate embedded in a porous medium saturated with a nanofluid, Nanoscale and Microscale Thermophysical Engineering, 15(2), 2010, 81-94.
[78] Chamkha, A.J., Abbasbandy, S., Rashad, A.M., Vajravelu, K., Radiation effects on mixed convection about a cone embedded in a porous medium filled with a nanofluid, Meccanica, 48, 2013, 275-285.
[79] Xiao, A.W., Lee, H.J., Capone, I., Robertson, A., Wi T., Fawdon, J., Wheeler, S., Lee, H.W., Grobert, N., Pasta, M., Understanding the conversion mechanism and performance of monodisperse FeF2 nanocrystal cathode, Nature Materials, 19, 2020, 644-654.
[80] Lewis, D.J., Zomberg, L.Z., Carter, D.J.D., Macfarlane, R.J., Single crystal winter bottom constructions of nanoparticles superlattices, Nature Materials, 2020, doi: 10.1038/s41563-020-0681-0.
[81] Little, A., Lee, C., John, C., Doyle, S., Maniv, E., Nair, N.L., Chen, W., Rees, D., Venderbos, J.W.F., Fernandes, R.M., Analyts, J., Orenstein, J., Three state nematicity in the triangular lattice antiferromagnetic Fe2NbS2, Nature Materials, 2020, doi: 10.1038/s41563-020-0681-0.
[82] Wang, S., Zhao, S., Shi, Z., Wu, F., Zhao, Z., Jiang, L., Wanatabe, K., Taniguchi, T., Zetti, A., Zhou, C., Wang, F., Nonlinear luttinger liquid plasmons in semiconducting single –walled carbon nanotubes, Nature Materials, 2020, doi: 10.103/1038/s41563-020-0652-5. | ||
آمار تعداد مشاهده مقاله: 814 تعداد دریافت فایل اصل مقاله: 493 |