آمار
| تعداد نشریات | 31 |
| تعداد شمارهها | 1,032 |
| تعداد مقالات | 9,135 |
| تعداد مشاهده مقاله | 10,461,818 |
| تعداد دریافت فایل اصل مقاله | 8,637,513 |
Hydrodynamic Behavior in Solar Oil Heat Exchanger Ducts Fitted with Staggered Baffles and Fins | ||
| Journal of Applied and Computational Mechanics | ||
| مقاله 1، دوره 8، شماره 3، مهر 2022، صفحه 774-790 اصل مقاله (2.03 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22055/jacm.2020.32468.2021 | ||
| نویسندگان | ||
| Younes Menni* 1؛ Ali J. Chamkha2؛ Houari Ameur3؛ Mohammad Hossein Ahmadi4 | ||
| 1Unit of Research on Materials and Renewable Energies, Department of Physics, Faculty of Sciences, Abou Bekr Belkaid University, BP 119-13000-Tlemcen, Algeria | ||
| 2Faculty of Engineering, Kuwait College of Science and Technology, Doha, Kuwait | ||
| 3Department of Technology, University Centre of Naama, P.O. Box 66, Naama 45000, Algeria | ||
| 4Faculty of Mechanical Engineering, Shahrood University of Technology, Shahrood, Iran | ||
| چکیده | ||
| The attachment of turbulators, such as baffles, fins, ribs, bars, and blocks, inside the thermal solar receiver ducts, is among the most effective mechanisms for important thermal exchange by creating the turbulence, extending the trajectory of the flow, increasing the surface of heat exchange, forcing recycling cells, and hence a high thermal exchange. The solar finned and baffled heat exchangers are employed in a wide application interval, and it is important to examine the design of a duct for this configuration of the flow field and its effect on the heat transport phenomenon. In This study, dynamic field simulations are reported in horizontal rectangular form ducts, using three obstacles with oil HTF (heat transfer fluid). Two various finned and baffled duct configurations are treated, i.e., case (A) with one fin and two baffles, and case (B) with two fins and one baffle. Different hydrodynamic fields, i.e., X-velocity and Y-speed, as well as various X-velocity profiles in many flow stations, related to Re value, are analyzed. A computational approach is applied in order to simulate the oil flow, using finite volume (FV) integration method, SIMPLE discretization algorithm, QUICK interpolation scheme, Standard k-epsilon turbulence model, and ANSYS FLUENT 12.0 software. Simulation results reported an unstable flow structure, with powerful recycling cells, on the backsides of each fin and baffle, as a result of fluid detachment at their upper front sharp edges, in both studied models (A and B). As expected, the first duct model, i.e., Case A, has better X- and Y-velocity values, due to its large recirculation regions. In This paper, many physical phenomena, such as the turbulence, instability, flow separation, and the appearance of reverse secondary currents, are reported. As its data confirmed by many previous numerical and experimental results, the suggested new models of finned and baffled heat exchangers filled with high thermal conductivity oil, allow an improvement in the dynamic thermal-energy behavior of many thermal devices such as flat plate solar collectors. | ||
| کلیدواژهها | ||
| Solar finned and baffled heat exchangers؛ flat plate solar collectors؛ dynamic thermal-energy behavior؛ CFD | ||
| مراجع | ||
|
[1] Berner, C., Durst, F., McEligot, D.M., Flow around baffles, ASME Journal of Heat Transfer, 106, 1984, 743-749.
[2] Habib, M.A., Attya, A.E., McEligot, D.M., Calculation of turbulent flow and heat transfer in channels with streamwise-periodic flow, ASME Journal of Turbomachinery, 110, 1988, 405-411.
[3] Yuan, Z.X., Tao, W.Q., Wang, Q.W., Numerical prediction for laminar forced convection heat transfer in parallel-plate channels with streamwise-periodic rod disturbances, International Journal for Numerical Methods in Fluids, 28, 1998, 1371-1387.
[4] Cheng, C.H., Huang, W.H., Numerical prediction for laminar forced convection in parallel-plate channels with transverse fin arrays, International Journal of Heat Mass Transfer, 34(11), 1991, 2739-2749.
[5] Hong, Y.J., Hsieh, S.S., An experimental investigation of heat transfer characteristics for turbulent flow over staggered ribs in a square duct, Experimental Thermal and Fluid Science, 4, 1991, 714-722.
[6] Bazdidi-Tehrani, F., Naderi-Abadi, M., Numerical analysis of laminar heat transfer in entrance region of a horizontal channel with transverse fins, International Communication in Heat and Mass Transfer, 31(2), 2004, 211-220.
[7] Demartini, L.C., Vielmo, H.A., Möller, S.V., Numeric and experimental analysis of the turbulent flow through a channel with baffle plates, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 26(2), 2004, 153-159.
[8] Li, H., Kottke, V., Effect of baffle spacing on pressure drop and local heat transfer in staggered tube arrangement, International Journal of Heat and Mass Transfer, 41(10), 1998, 1303-1311.
[9] Mousavi, S.S., Hooman, K., Heat and fluid flow in entrance region of a channel with staggered baffles, Energy Conversion and Management, 47(15), 2006, 2011-2019.
[10] Pirouz, M.M., Farhadi, M., Sedighi, K., Nemati, H., Fattahi, E., Lattice Boltzmann simulation of conjugate heat transfer in a rectangular channel with wall-mounted obstacles, Scientia Iranica B, 18(2), 2011, 213-221.
[11] Mokhtari, M., Gerdroodbary M.B., Yeganeh, R., Fallah, K., Numerical study of mixed convection heat transfer of various fin arrangements in a horizontal channel, Engineering Science and Technology, 20, 2017, 1106-1114.
[12] Webb, B.W., Ramadhyani, S., Conjugate heat transfer in a channel with staggered ribs, International Journal of Heat Mass Transfer, 28, 1985, 1679-1687.
[13] Wen, J., Yang H., Wang, S., Xue, Y., Tong, X., Experimental investigation on performance comparison for shell-and-tube heat exchangers with different baffles, International Journal of Heat and Mass Transfer, 84, 2015, 990-997.
[14] Dong, C., Zhou, X.F., Dong, R., Zheng, Y.Q., Chen, Y.P., Hu, G.L., Xu, Y.S., Zhang, Z.G., Guo, W.W., An analysis of performance on trisection helical baffles heat exchangers with diverse inclination angles and baffle structures, Chemical Engineering Research and Design, 121, 2017, 421-430.
[15] Skullong, S., Thianpong, C., Jayranaiwachira, N., Promvonge, P., Experimental and numerical heat transfer investigation in turbulent square-duct flow through oblique horseshoe baffles, Chemical Engineering and Processing, 99, 2016, 58-71.
[16] Thianpong, C., Yongsiri, K., Nanan, K., Eiamsa-ard, S., Thermal performance evaluation of heat exchangers fitted with twisted-ring turbulators, International Communications in Heat and Mass Transfer, 39, 2012, 861-868.
[17] Nanan, K., Thianpong, C., Pimsarn, M., Chuwattanakul, V., Eiamsa-ard, S., Flow and thermal mechanisms in a heat exchanger tube inserted with twisted cross-baffle turbulators, Applied Thermal Engineering, 114, 2017, 130-147.
[18] Promvonge, P., Thermal performance in square-duct heat exchanger with quadruple V-finned twisted tapes, Applied Thermal Engineering, 91, 2015, 298-307.
[19] Eiamsa-ard, S., Wongcharee, K., Eiamsa-ard, P., Thianpong, C., Heat transfer enhancement in a tube using delta-winglet twisted tape inserts, Applied Thermal Engineering, 30, 2010, 310-318.
[20] Chamoli, S., A Taguchi approach for optimization of flow and geometrical parameters in a rectangular channel roughened with V down perforated baffles, Case Studies in Thermal Engineering, 5, 2015, 59-69.
[21] Kumar, R., Kumar, A., Chauhan Ranchan, Sethi Muneesh, Heat transfer enhancement in solar air channel with broken multiple V-type baffle, Case Studies in Thermal Engineering, 8, 2016, 187-197.
[22] Oguntala, G., Abd-Alhameed, R., Haar wavelet collocation method for thermal analysis of porous fin with temperature-dependent thermal conductivity and internal heat generation, Journal of Applied and Computational Mechanics, 3(3), 2017, 185-191.
[23] Davies, T.V., Planetary Atmospheres and Convection in Rotating Fluids, Nature, 180(4600), 1957, 1455-1461.
[24] Sobamowo, G.M., Kamiyo, O.M., Multi-boiling heat transfer analysis of a convective straight fin with temperature-dependent thermal properties and internal heat generation, Journal of Applied and Computational Mechanics, 3(4), 2017, 229-239.
[25] Caccia, M., Tabandeh-Khorshid, M., Itskos, G., Strayer, A. R., Caldwell, A. S., Pidaparti, S., et al., Ceramic-metal composites for heat exchangers in concentrated solar power plants, Nature, 562(7727), 2018, 406-409.
[26] Ghahremani, E., Ghaffari, R., Ghadjari, H., Mokhtari, J., Effect of variable thermal expansion coefficient and nanofluid properties on steady natural convection in an enclosure, Journal of Applied and Computational Mechanics, 3(4), 2017, 240-250.
[27] Amy, C., Budenstein, D., Bagepalli, M., England, D., DeAngelis, F., Wilk, G., et al., Pumping liquid metal at high temperatures up to 1,673 kelvin, Nature, 550(7675), 2017, 199-203.
[28] Akinshilo, A.T., Olofinkua, J.O., Olaye, O., Flow and heat transfer analysis of the sodium alginate conveying copper nanoparticles between two parallel plates, Journal of Applied and Computational Mechanics, 3(4), 2017, 258-266.
[29] Tolstoy, M., Waldhauser, F., Bohnenstiehl, D.R., Weekly, R.T., Kim, W.Y., Seismic identification of along-axis hydrothermal flow on the East Pacific Rise, Nature, 451(7175), 2008, 181-184.
[30] Oguntala, G., Abd-Alhameed, R., Thermal analysis of convective-radiative fin with temperature-dependent thermal conductivity using Chebychev spectral collocation method, Journal of Applied and Computational Mechanics, 4(2), 2018, 87-94.
[31] Amari, T., Luciani, J.F., Aly, J.J., Small-scale dynamo magnetism as the driver for heating the solar atmosphere, Nature, 522(7555), 2015, 188-191.
[32] Menni, Y., Chamkha, A.J., Lorenzini, G., Ameur, H., Salmi, M., Fridja, D., Numerical simulation of dynamic pressure and kinetic energy fields of turbulent oil flow in staggered baffled pipes, Mathematical Modelling of Engineering Problems, 7(1), 2020, 10-16.
[33] Gholami, M.R., Akbari, O.A., Marzban, A., Toghraie, D., Shabani, G.A.S., Zarringhalam, M., The effect of rib shape on the behavior of laminar flow of oil/MWCNT nanofluid in a rectangular microchannel, Journal of Thermal Analysis and Calorimetry, 134(3), 2017, 1611-1628.
[34] Nasiruddin, Siddiqui, M.H.K., Heat transfer augmentation in a heat exchanger tube using a baffle, International Journal of Heat and Fluid Flow, 28, 2007, 318-328.
[35] Petukhov, B.S., Heat transfer and friction in turbulent pipe flow with variable physical properties, Advances in Heat Transfer, 6, 1970, 503-564.
[36] Launder, B.E., Spalding, D.B., The numerical computation of turbulent flow, Computer Methods in Applied Mechanics and Engineering, 3(2), 1974, 269-289.
[37] Patankar, S.V., Numerical heat transfer and fluid flow, McGraw-Hill, New York, 1980.
[38] Leonard, B.P., Mokhtari, S., Ultra-sharp nonoscillatory convection schemes for high-speed steady multidimensional flow, NASA TM 1-2568, NASA Lewis Research Center, 1990.
[39] ANSYS Fluent 12.0, Theory Guide, Ansys Inc., 2012. | ||
|
آمار تعداد مشاهده مقاله: 1,301 تعداد دریافت فایل اصل مقاله: 1,258 |
||