A New Stress Based Approach for Nonlinear Finite Element Analysis

[1] Bathe, K.J., Finite element procedures, Second Edition, Massachusetts Institute of Technology, Cambridge, MA 02139, USA, 2014.

[2] Wriggers, P., Nonlinear Finite Element Methods, Springer-Verlag Berlin Heidelberg, 2008.

[3] Rabczuk, T., Zi G., Bordas, S., Nguyen-Xuan, H., A simple and robust three-dimensional cracking-particle method without enrichment, Computer Methods in Applied Mechanics and Engineering, 199(37-40) (2010) 2437-2455.

[4] Bathe, K.J., Cimento, A.P., Some Practical Procedures for the Solution of Nonlinear Finite Element Equations, Computer Methods in Applied Mechanics and Engineering, 22 (1980) 59-85.

[5] Ypma, T.J., Historical development of the Newton-Raphson method, SIAM Review, 37(4) (1995) 531–551.

[6] Bicanic, N., Johnson, K.H., Who was ‘-Raphson’?, International Journal for Numerical Methods in Engineering, 14 (1979) 148–152.

[7] Rabczuk, T., Belytschko, T., Xiao, S.P., Stable particle methods based on Lagrangian kernels, Computer Methods in Applied Mechanics and Engineering, 193(12-14) (2004) 1035-1063.

[8] Rabczuk, T., Belytschko, T., A three dimensional large deformation meshfree method for arbitrary evolving cracks, Computer Methods in Applied Mechanics and Engineering, 196(29-30) (2007) 2777-2799

[9] Vu-Bac, N., Duong, T.X., Lahmer, T., Zhuang, X., Sauer, R.A., Park, H.S., Rabczuk, T., A NURBS-based Inverse Analysis for Reconstruction of Nonlinear Deformations in Thin Shell Structures, Computer Methods in Applied Mechanics and Engineering, 331 (2018) 427-455.

[10] Steigmann, D.J., Invariants of the Stretch Tensors and their Application to Finite Elasticity Theory, Mathematics and Mechanics of Solids, 7(4) (2002) 393-404.

[11] Nikishkov, G.P., Introduction to the Finite Element Method, Lecture Notes, University of Aizu, Aizu-Wakamatsu 965-8580, Japan, 2004.

[12] Nguyen-Thanh, N., Kiendl, J., Nguyen-Xuan, H., Wuchner, R., Bletzinger, K.U., Bazilevs, Y., Rabczuk, T., Rotation free isogeometric thin shell analysis using PHT-splines, Computer Methods in Applied Mechanics and Engineering, 200(47-48) (2011) 3410-3424

[13] Nguyen-Thanh, N., Nguyen-Xuan, H., Bordas, S., Rabczuk, T., Isogeometric analysis using polynomial splines over hierarchical T-meshes for two-dimensional elastic solids, Computer Methods in Applied Mechanics and Engineering, 200(21-22) (2011) 1892-1908.

[14] Nguyen-Thanh, N., Valizadeh, N., Nguyen, M.N., Nguyen-Xuan, H., Zhuang, X., Areias, P., Zi, G., Bazilevs, Y., De Lorenzis, L., Rabczuk, T., An extended isogeometric thin shell analysis based on Kirchho-Love theory, Computer Methods in Applied Mechanics and Engineering, 284 (2015) 265 – 291.

[15] Nguyen-Thanh, N., Zhou, K., Zhuang, X., Areias, P., Nguyen-Xuan, H., Bazilevs, Y., Rabczuk, T., Isogeometric analysis of large-deformation thin shells using RHT-splines for multiple-patch coupling, Computer Methods in Applied Mechanics and Engineering, 316 (2017) 1157-1178.

[16] Ghasemi, H., Park, H., Rabczuk, T., A level-set based IGA formulation for topology optimization of flexoelectric materials, Computer Methods in Applied Mechanics and Engineering, 313 (2017) 239-258.

[17] Nguyen, V.P., Anitescu, C., Bordas, S.P.A., Rabczuk, T., Isogeometric analysis: An overview and computer implementation aspects, Mathematics and Computers in Simulations, 117 (2015) 89-116.

[18] Anitescu, C., Hossain, N., Rabczuk, T., Recovery-based error estimation and adaptivity using high-order splines over hierarchical T-meshes, Computer Methods in Applied Mechanics and Engineering, 328(1) (2018) 638-662.

[19] Ghorashi, S., Valizadeh, N., Mohammadi, S., Rabczuk, T., T-spline based XIGA for Fracture Analysis of Orthotropic Media, Computers & Structures, 147 (2015) 138-146.

[20] Rabczuk, T., Areias, P.M.A., Belytschko, T., A meshfree thin shell method for non- linear dynamic fracture, International Journal for Numerical Methods in Engineering, 72(5) (2007) 524-548.

[21] Rabczuk, T., Gracie, R., Song, J.H., Belytschko, T., Immersed particle method for fluid–structure interaction, International Journal for Numerical Methods in Engineering, 81 (2009) 48–71.

[22] Rabczuk, T., Belytschko, T., Cracking particles: a simplied meshfree method for arbitrary evolving cracks, International Journal for Numerical Methods in Engineering, 61(13) (2004) 2316-2343.

[23] Talebi, H., Silani, M., Bordas, S.P.A., Kerfriden, P., Rabczuk, T., A computational library for multiscale modeling of material failure, Computational Mechanics, 53(5) (2014) 1047–1071.

[24] Areias, P., Cesar de Sa, J., Rabczuk, T., Camanho, P.P., Reinoso, J., Effective 2D and 3D crack propagation with local mesh renement and the screened Poisson equation, Engineering Fracture Mechanics, 189 (2018) 339-360

[25] Areias, P., Rabczuk, T., Steiner-point free edge cutting of tetrahedral meshes with applications in fracture, Finite Elements in Analysis & Design, 132 (2017) 27-41

[26] Areias, P., Rabczuk, T., Msekh, M., Phase-field analysis of finite-strain plates and shells including element subdivision, Computer Methods in Applied Mechanics and Engineering, 312(C) (2016) 322-350.

[27] Areias, P., Msekh, M.A., Rabczuk, T., Damage and fracture algorithm using the screened Poisson equation and local remeshing, Engineering Fracture Mechanics, 158 (2016) 116-143.

[28] Areias, P.M.A., Rabczuk, T., Camanho, P.P., Finite strain fracture of 2D problems with injected anisotropic softening elements, Theoretical and Applied Fracture Mechanics, 72 (2014) 50-63.

[29] Nguyen-Xuan, H., Liu, G.R., Bordas, S., Natarajan, S., Rabczuk, T., An adaptive singular ES-FEM for mechanics problems with singular eld of arbitrary order, Computer Methods in Applied Mechanics and Engineering, 253 (2013) 252-273.

[30] Chau-Dinh, T., Zi, G., Lee, P.S., Song, J.H., Rabczuk, T., Phantom-node Method for Shell Models with Arbitrary Cracks, Computers & Structures, 92-93 (2012) 242-256.

[31] Rabczuk, T., Bordas, S., Zi, G., On three-dimensional modelling of crack growth using partition of unity methods, Computers & Structures, 88(23-24) (2010) 1391-1411.

[32] Nanthakumar, S., Lahmer, T., Zhuang, X., Zi, G., Rabczuk, T., Detection of material interfaces using a regularized level set method in piezoelectric structures, Inverse Problems in Science and Engineering, 24(1) (2016) 153 – 176.

[33] Hamdia, K., Zhuang, X., Alajlan, N., Rabczuk, T., Sensitivity and uncertainty analyses for flexoelectric nanostructures, Computer Methods in Applied Mechanics and Engineering, 337 (2018) 95-109

[34] Ghasemi, H., Park, H.S., Rabczuk, T., Multi-material level set-based topology optimization of exoelectric composites, Computer Methods in Applied Mechanics and Engineering, 332 (2018) 47-62.

[35] Vu-Bac, N., Lahmer, T., Zhuang, X., Nguyen-Thoi, T., Rabczuk, T., A software framework for probabilistic sensitivity analysis for computationally expensive models, Advances in Engineering Software, 100 (2016) 19–31.

[36] Mauludin, L.M., Zhuang, X., Rabczuk, T., Computational modeling of fracture in encapsulation-based self-healing concrete using cohesive elements, Composite Structures, 196 (2018) 63-75.

[37] Rabczuk, T., Zi, G., Bordas, S., Nguyen-Xuan, H., A geometrically nonlinear three dimensional cohesive crack method for reinforced concrete structures, Engineering Fracture Mechanics, 75(16) (2008) 4740-4758.

[38] Bordas, S., Zi, G., Rabczuk, T., Three-dimensional non-linear fracture mechanics by enriched meshfree methods without asymptotic enrichment, IUTAM Symposium on Discretization Methods for Evolving Discontinuities, 5 (2007) 21-36.

[39] Areias, P., Rabczuk, T., Dias-da-Costa, D., Element-wise fracture algorithm based on rotation of edges, Engineering Fracture Mechanics, 110 (2013) 113–137.

[40] Areias, P., Rabczuk, T., Finite strain fracture of plates and shells with configurational forces and edge rotation, International Journal for Numerical Methods in Engineering, 94(12) (2013) 1099-1122.

[41] Pattabhi, R., Budarapu, R.G., Bordas, S.P.A., Rabczuk, T., An adaptive multiscale method for quasi-static crack growth, Computational Mechanics, 53(6) (2014) 1129–1148.

[42] Amiri, F., Anitescu, C., Arroyo, M., Bordas, S.P.A., Rabczuk, T., XLME interpolants, a seamless bridge between XFEM and enriched meshless methods, Computational Mechanics, 53(1) (2014) 45–57.

[43] Hamdia, K., Zhuang, X., Silani, M., He, P., Rabczuk, T., Stochastic analysis of the fracture toughness of polymeric nanoparticle composites using polynomial chaos expansions, International Journal of Fracture, 206(2) (2017) 215-227.

[44] Talebi, H, Silani, M., Rabczuk, T., Concurrent Multiscale Modelling of Three Dimensional Crack and Dislocation Propagation, Advances in Engineering Software, 80 (2015) 82-92.

[45] Ren, H., Zhuang, X., Rabczuk, T., Dual-horizon peridynamics: A stable solution to varying horizons, Computer Methods in Applied Mechanics and Engineering, 318 (2017) 762–782.

[46] Ren, H., Zhuang, X., Cai, Y., Rabczuk, T., Dual-horizon peridynamics, Numerical Methods in Engineering, 108(12) (2016) 1451-1476.

[47] Zhuang, X., Huang, R., Liang, C., Rabczuk, T., A Coupled Thermo-Hydro-Mechanical Model of Jointed Hard Rock for Compressed Air Energy Storage, Mathematical Problems in Engineering, 2014 (2014) Article ID 179169.

[48] Msekh, M.A., Nguyen-Cuong, H., Zi, G., Areias, P., Zhuang, X., Rabczuk, T., Fracture properties prediction of clay/epoxy nanocomposites with interphase zones using a phase field model, Engineering Fracture Mechanics, 188 (2017) 287-299.

[49] Amiri, F., Milan, D., Shen, Y., Rabczuk, T., Arroyo, M., Phase-field modeling of fracture in linear thin shells, Theoretical and Applied Fracture Mechanics, 69 (2014) 102-109.

[50] Anitescu, C., Atroshchenko, E., Alajlan, N., Rabczuk, T., Articial Neural Network Methods for the Solution of Second Order Boundary Value Problems, Computers, Materials & Continua, 59(1) (2019) 345-359.

[51] Rabczuk T., Ren H., Zhuang X., A nonlocal operator method with application on electromagnetic waveguide problems, Computers, Materials and Continua, 59(1) (2019) 31-55.

[52] SM 1001, 30 Nm Torsion Testing Machine, User Guide, TecQuipment Ltd 2015, Bonsall St, Long Eaton, Nottingham NG10 2AN, UK.

[53] EN 1992-1-1 (2004): Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings [Authority: The European Union Per Regulation 305/2011, Directive 98/34/EC, Directive 2004/18/EC].