Modelling of Crack Growth Using a New Fracture Criteria Based Peridynamics

[1] Amiri F., Millan D., Arroyo M., Silani M., Rabczuk T. Fourth order phase-field model for local max-ent approximants applied to crack propagation. Computer Methods in Applied Mechanics and Engineering, 312 (2016) 254-275.

[2] Amiri F., Milan D., Shen Y., Rabczuk T., Arroyo M. Phase-field modeling of fracture in linear thin shells. Theoretical and Applied Fracture Mechanics, 69 (2014) 102-109.

[3] Areias P., Rabczuk T., Cesar de Sa J. A novel two-stage discrete crack method based on the screened Poisson equation and local mesh refinement. Computational Mechanics, 58(6) (2016) 1003-1018.

[4] Quoc T.T., Rabczuk T., Meschke G., Bazilevs Y. A higher-order stress-based gradient-enhanced damage model based on isogeometric analysis. Computer Methods in Applied Mechanics and Engineering, 304 (2016) 584-604.

[5] Budarapu P., Gracie R., Bordas S., Rabczuk T. An adaptive multiscale method for quasi-static crack growth. Computational Mechanics, 53(6) (2014) 1129-1148.

[6] Budarapu P., Gracie R. Shih-Wei Y., Zhuang X., Rabczuk T. Efficient coarse graining in multiscale modeling of fracture. Theoretical and Applied Fracture Mechanics, 69 (2014) 126-143.

[7] Silani M., Talebi H., Hamouda A.S., Rabczuk T.Nonlocal damage modelling in clay/epoxy nanocomposites using a multiscale approach. Journal of Computational Science, 15 (2016) 18-23.

[8] Talebi H, Silani M., Rabczuk T. Concurrent multiscale modeling of three dimensional crack and dislocation propagation. Advances in Engineering Software, 80 (2015) 82-92.

[9] Silani M., Ziaei-Rad S., Talebi H., Rabczuk T. A Semi-Concurrent Multiscale Approach for Modeling Damage in Nanocomposites. Theoretical and Applied Fracture Mechanics, 74 (2014) 30-38.

[10] Talebi H., Silani M., Bordas S., Kerfriden P., Rabczuk T. A Computational Library for Multiscale Modelling of Material Failure. Computational Mechanics, 53(5) (2014) 1047-1071.

[11] Areias P., Rabczuk T., Msekh M. Phase-field analysis of finite-strain plates and shells including element subdivision. Computer Methods in Applied Mechanics and Engineering, 312(C) (2016) 322-350.

[12] Areias P., Msekh M.A., Rabczuk T. Damage and fracture algorithm using the screened Poisson equation and local remeshing. Engineering Fracture Mechanics, 158 (2016) 116-143.

[13] Areias P.M.A., Rabczuk T., P.P. Camanho. Finite strain fracture of 2D problems with injected anisotropic softening elements. Theoretical and Applied Fracture Mechanics, 72 (2014) 50-63.

[14] Areias P., Rabczuk T., Dias-da-Costa D. Element-wise fracture algorithm based on rotation of edges. Engineering Fracture Mechanics, 110 (2013) 113-137.

[15] Areias P., Rabczuk T., Camanho P.P. Initially rigid cohesive laws and fracture based on edge rotations. Computational Mechanics, 52(4) (2013) 931-947.

[16] Areias P., Rabczuk T. Finite strain fracture of plates and shells with configurational forces and edge rotation. International Journal for Numerical Methods in Engineering, 94(12) (2013) 1099-1122.

[17] Dolbow J. E. An extended finite element method with discontinuous enrichment for applied mechanics, Northwestern University, 2000.

[18] Fries T P, Belytschko T. The extended/generalized finite element method: an overview of the method and its applications. International Journal for Numerical Methods in Engineering, 84(3) (2010) 253-304.

[19] Ghorashi S., Valizadeh N., Mohammadi S., Rabczuk T. T-spline based XIGA for Fracture Analysis of Orthotropic Media. Computers Structures, 147 (2015) 138-146.

[20] Nguyen-Thanh N., Valizadeh N., Nguyen M.N., Nguyen-Xuan H., Zhuang X., Areias P., Zi G., Bazilevs Y., De Lorenzis L., Rabczuk T. An extended isogeometric thin shell analysis based on Kirchhoff-Love theory. Computer Methods in Applied Mechanics and Engineering, 284 (2015) 265-291.

[21] Shi G. H. Numerical manifold method and discontinuous deformation analysis. Chinese Journal of Rock Mechanics and Engineering, 16(3) (1988) 279-292.

[22] Cai Y, Zhuang X, Zhu H. A generalized and efficient method for finite cover generation in the numerical manifold method. International Journal of Computational Methods, 10(05) (2013) 1350028.

[23] Belytschko T, Lu Y Y, Gu L. Element‐free Galerkin methods. International Journal for Numerical Methods in Engineering, 37(2) (1994) 229-256.

[24] Liu W K, Jun S, Zhang Y F. Reproducing kernel particle methods. International Journal for Numerical Methods in Fluids, 20(8‐9) (1995) 1081-1106.

[25] Li S, Liu W K. Meshfree and particle methods and their applications. Applied Mechanics Reviews, 55(1) (2002) 1-34.

[26] Nguyen, V. P., Rabczuk, T., Bordas, S., Duflot, M. Meshless methods: a review and computer implementation aspects. Mathematics and Computers in Simulation, 79(3) (2008) 763-813.

[27] Zhuang X, Augarde C E, Mathisen K M. Fracture modeling using meshless methods and level sets in 3D: framework and modeling. International Journal for Numerical Methods in Engineering, 92(11) (2012) 969-998.

[28] Amiri F., Anitescu C., Arroyo M, Bordas S., Rabczuk T. XLME interpolants, a seamless bridge between XFEM and enriched meshless methods. Computational Mechanics, 53(1) (2014) 45-57.

[29] Rabczuk T., Areias P.M.A. A meshfree thin shell for arbitrary evolving cracks based on an external enrichment. Cmes Computer Modeling in Engineering Ences, 16(2) (2006) 115-130.

[30] Rabczuk T, Bordas S, Zi G. A three-dimensional meshfree method for continuous multiple-crack initiation, propagation and junction in statics and dynamics. Computational Mechanics, 40(3) (2007) 473-495.

[31] Rabczuk T., Areias P.M.A., Belytschko T. A meshfree thin shell method for nonlinear dynamic fracture. International Journal for Numerical Methods in Engineering, 72(5) (2007) 524-548.

[32] Rabczuk T., Zi G. A meshfree method based on the local partition of unity for cohesive cracks. Computational Mechanics, 39(6) (2007) 743-760.

[33] Rabczuk T., Bordas S., Zi G. on three-dimensional modelling of crack growth using partition of unity methods. Computers & Structures, 88(23-24) (2010) 1391-1411.

[34] Rabczuk T., Zi G., Bordas S., Nguyen-Xuan H. A geometrically non-linear three dimensional cohesive crack method for reinforced concrete structures. Engineering Fracture Mechanics, 75(16) (2008) 4740-4758.

[35] Rabczuk T., Gracie R., Song J.H., Belytschko T. Immersed particle method for fluid-structure interaction. International Journal for Numerical Methods in Engineering, 81(1) (2010) 48-71.

[36] Bordas, S., Rabczuk T., Zi. G. Three-dimensional crack initiation, propagation, branching and junction in non-linear materials by extrinsic discontinuous enrichment of meshfree methods without asymptotic enrichment. Engineering Fracture Mechanics, 75(5) (2008) 943-960.

[37] Rabczuk T., Belytschko T. A three dimensional large deformation meshfree method for arbitrary evolving cracks. Computer Methods in Applied Mechanics and Engineering, 196(29-30) (2007) 2777-2799.

[38] Rabczuk T., Zi G., Bordas S., Nguyen-Xuan H. A simple and robust three-dimensional cracking-particle method without enrichment. Computer Methods in Applied Mechanics and Engineering, 199(37-40) (2010) 2437-2455.

[39] Rabczuk T., Belytschko T. Cracking particles: a simplified meshfree method for arbitrary evolving cracks. International Journal for Numerical Methods in Engineering, 61(13) (2004) 2316-2343.

[40] Erdogan F, Sih G C. on the crack extension in plates under plane loading and transverse shear. Journal of Basic Engineering, 85(4) (1963) 519-527.

[41] Sih G C. Strain-energy-density factor applied to mixed mode crack problems. International Journal of Fracture, 10(3) (1974) 305-321.

[42] Hussain M A, Pu S L, Underwood J. Strain energy release rate for a crack under combined mode I and mode II. Fracture Analysis: Proceedings of the 1973 National Symposium on Fracture Mechanics, Part II. ASTM International, 1974.

[43] Ayatollahi M R, Abbasi H. Prediction of fracture using a strain based mechanism of crack growth. Building Research Journal, 49 (2011) 167-180.

[44] Sato S. Combined Mode Fracture Toigliess measurement by the Disk Test. Journal of Engineering Materials and Technology, 100(2) (1978) 175-182.

[45] Shetty D K, Rosenfield A R, Duckworth W H. Mixed-mode fracture in biaxial stress state: application of the diametral-compression (Brazilian disk) test. Engineering Fracture Mechanics, 26(6) (1987) 825-840.

[46] Chang S H, Lee C I, Jeon S. Measurement of rock fracture toughness under modes I and II and mixed-mode conditions by using disc-type specimens. Engineering Geology, 66(1) (2002) 79-97.

[47] Aliha M R M, Ashtari R, Ayatollahi M R. Mode I and mode II fracture toughness testing for a coarse grain marble. Applied Mechanics and Materials, 5 (2006) 181-188.

[48] Richard H A, Benitz K. A loading device for the creation of mixed mode in fracture mechanics. International Journal of Fracture, 22(2) (1983) 55-58.

[49] Arcan M, Hashin Z, Voloshin A. A method to produce uniform plane-stress states with applications to fiber-reinforced materials. Experimental Mechanics, 18(4) (1978) 141-146.

[50] Zipf Jr R K, Bieniawski Z T. Mixed mode testing for fracture toughness of coal based on critical-energy-density. The 27th US Symposium on Rock Mechanics (USRMS). American Rock Mechanics Association, 1986.

[51] Belytschko, T., Black T. Elastic crack growth in finite elements with minimal remeshing. International Journal for Numerical Methods in Engineering, 45(5) (1999) 601-620.

[52] Sukumar, N., Belytschko, T. Arbitrary branched and intersecting cracks with the extended finite element method. International Journal for Numerical Methods in Engineering, 48 (2000) 1741-1760.

[53] Nagashima T, Omoto Y, Tani S. Stress intensity factor analysis of interface cracks using X‐FEM. International Journal for Numerical Methods in Engineering, 56(8) (2003) 1151-1173.

[54] Fang X J, Jin F, Wang J T. Cohesive crack model based on extended finite element method. Journal of Tsinghua University, 47(3) (2007) 344-347.

[55] Fang X, Jin F, Wang J. Seismic fracture simulation of the Koyna gravity dam using an extended finite element method. Journal of Tsinghua University, 48(12) (2008) 2065-2069.

[56] J-H Song, P.M.A. Areias, and T. Belytschko. A method for dynamic crack and shear band propagation with phantom nodes. International Journal for Numerical Methods in Engineering, 67(6) (2006) 868-893.

[57] A. Hansbo and P. Hansbo. A finite element method for the simulation of strong and weak discontinuities in solid mechanics. Computer Methods in Applied Mechanics and Engineering, 193(33-35) (2004) 3523-3540.

[58] Areias P M A, Belytschko T. A comment on the article A finite element method for simulation of strong and weak discontinuities in solid mechanics by A. Hansbo and P. Hansbo [Comput. Methods Appl. Mech. Engrg. 193 (2004) 3523–3540], Computer Methods in Applied Mechanics & Engineering, 195 (2006) 1275-1276.

[59] Rabczuk T., Zi G., Gerstenberger A., Wall W.A. A new crack tip element for the phantom node method with arbitrary cohesive cracks. International Journal for Numerical Methods in Engineering, 75(5) (2008) 577-599.

[60] Chau-Dinh T, Zi G, Lee P S, Rabczuk T, Song J H. Phantom-node method for shell models with arbitrary cracks. Computers & Structures, 92 (2012) 242-256.

[61] Zhuang X, Zhu H, Augarde C. An improved meshless Shepard and least squares method possessing the delta property and requiring no singular weight function. Computational Mechanics, 53(2) (2014) 343-357.

[62] Zhuang X, Cai Y, Augarde C. A meshless sub-region radial point interpolation method for accurate calculation of crack tip fields. Theoretical and Applied Fracture Mechanics, 69 (2014) 118-125.

[63] Ganzenmüller G.C., Hiermaier S., May M. on the similarity of meshless discretizations of peridynamics and Smoothed Particle Hydrodynamics. Computers & Structures, 150 (2015) 71-78.

[64] Bessa M A, Foster J T, Belytschko T, Liu W K. A meshfree unification: reproducing kernel peridynamics. Computational Mechanics, 53(6) (2014) 1251-1264.

[65] Silling S A. Reformulation of elasticity theory for discontinuities and long-range forces. Journal of the Mechanics and Physics of Solids, 48(1) (2000) 175-209.

[66] Silling S A, Zimmermann M, Abeyaratne R. Deformation of a peridynamic bar. Journal of Elasticity, 73(1-3) (2003) 173-190.

[67] Silling, S.A., Reformulation of elasticity theory for discontinuities and long-range forces. Journal of the Mechanics and Physics of Solids, 48(1) (2000) 175-209.

[68] Silling, S.A., M. Zimmermann, and R. Abeyaratne, Deformation of a peridynamic bar. Journal of Elasticity, 73(1-3) (2003) 173-190.

[69] Silling, S.A. Askari, E. A meshfree method based on the peridynamic model of solid mechanics. Computers & Structures, 83(17) (2005) 1526-1535.

[70] Ren H., Zhuang X., Cai Y., Rabczuk T. Dual-Horizon Peridynamics. International Journal for Numerical Methods in Engineering, 108 (2016) 1451-1476.

[71] Ren H, Zhuang X, Rabczuk T. Dual-horizon peridynamics: A stable solution to varying horizons. Computer Methods in Applied Mechanics and Engineering, 318 (2017) 762-782.

[72] Rabczuk T, Ren H. A peridynamics formulation for quasi-static fracture and contact in rock. Engineering Geology, 225C (2017) 42-48.

[73] Silling S A, Askari E. A meshfree method based on the peridynamic model of solid mechanics. Computers & structures, 83(17) (2005) 1526-1535.

[74] Silling, S.A. and F. Bobaru. Peridynamic modeling of membranes and fibers. International Journal of Non-Linear Mechanics, 40(2) (2005) 395-409.

[75] Weckner, O., Brunk, G., Epton, M. A., Silling, S. A., Askari, E. Green’s functions in non-local three-dimensional linear elasticity. Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences. 465(2112) (2009) 3463-3487.

[76] Yu K, Xin X J, Lease K B. A new adaptive integration method for the peridynamic theory. Modelling and Simulation in Materials Science and Engineering, 19(4) (2011) 045003.

[77] Kilic B. Peridynamic theory for progressive failure prediction in homogeneous and heterogeneous materials. The University of Arizona, 2008.

[78] Foster J T, Silling S A, Chen W. An energy based failure criterion for use with peridynamic states. International Journal for Multiscale Computational Engineering, 9(6) (2011) 675–688.

[79] Silling S A, Bobaru F. Peridynamic modeling of membranes and fibers. International Journal of Non-Linear Mechanics, 40(2) (2005) 395-409.

[80] Ayatollahi M R, Aliha M R M. Analysis of a new specimen for mixed mode fracture tests on brittle materials. Engineering Fracture Mechanics, 76(11) (2009) 1563-1573.

[81] Shen F, Zhang Q, Huang D, et al. Damage and failure process of concrete structure under uni-axial tension based on peridynamics modeling. Chinese Journal of Mechanical Engineering, 30 (2013) 79-83.

[82] Zhou X P, Shou Y D. Numerical Simulation of Failure of Rock-Like Material Subjected to Compressive Loads Using Improved Peridynamic Method. International Journal of Geomechanics, 17(3) (2017) 04016086.

[83] Ren H, Zhuang X, Rabczuk T. A new peridynamic formulation with shear deformation for elastic solid. Journal of Micromechanics and Molecular Physics, 1(2) (2016) 1650009.

[84] Silani M., Talebi H., Ziaei-Rad S., Hamouda A.M.S., Zi G., Rabczuk T. A three dimensional Extended Arlequin Method for Dynamic Fracture. Computational Materials Science, 96 (2015) 425-431.

[85] Talebi H., Silani M., Bordas S. P. A., Kerfriden P., Rabczuk T. Molecular Dynamics/XFEM Coupling by a Three-Dimensional Extended Bridging Domain with Applications to Dynamic Brittle Fracture. International Journal for Multiscale Computational Engineering, 11(6) (2013) 527-541.

[86] Yang S.W., Budarapu P.R., Mahapatra D.R., Bordas S.P.A., Zi G., Rabczuk T. A Meshless Adaptive Multiscale Method for Fracture. Computational Materials Science, 96 (2015) 382-395.

[87] Costa, T., Bond, S., Littlewood, D., Moore, S. Peridynamic Multiscale Finite Element Methods. No. SAND2015-10472. Sandia National Laboratories, Al-buquerque, United States, 2015.

[88] Jung, J. and J. Seok. Fatigue crack growth analysis in layered heterogeneous material systems using peridynamic approach. Composite Structures, 152 (2016) 403-407.

[89] Gu X, Zhou X P. The numerical simulation of tensile plate with circular hole using peridynamic theory. Chinese Journal of Mechanical Engineering, 36(5) (2015) 376–383.

[90] Cheng Z, Liu J. Fracture analysis of functionally graded materials under impact loading based on peridynamics. Chinese Journal of Applied Mechanics, 4 (2016) 634-639.

[91] Zhou, X. and Y. Shou, Numerical Simulation of Failure of Rock-Like Material Subjected to Compressive Loads Using Improved Peridynamic Method. International Journal of Geomechanics, 17(3) (2017) 04016086.

[92] Ren H, Zhuang X, Rabczuk T. Implementation of GTN Model in Dual-horizon Peridynamics. Procedia Engineering, (197) (2017) 224-232.

[93] Zeng S P, Bilateral crack growth behavior of Q345 steel under uniaxial tensile load. Dissertation for Master Degree Guangxi University, 2014.